Hi Andy,
Am 21.12.23 um 02:07 schrieb Andy Yan:
Hi Alex:
On 12/20/23 19:16, Alex Bee wrote:
Hi Andy,
Am 18.12.23 um 11:55 schrieb Andy Yan:
From: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
The system will hang at bringup secondary CPUs
without psci node.
Signed-off-by: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
---
(no changes since v1)
arch/arm/boot/dts/rockchip/rk3036.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi
b/arch/arm/boot/dts/rockchip/rk3036.dtsi
index 78686fc72ce6..5344803442a1 100644
--- a/arch/arm/boot/dts/rockchip/rk3036.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -67,6 +67,11 @@ display-subsystem {
ports = <&vop_out>;
};
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
I don't think that's an good idea.
Why?
It's only what I've been told before: We shoudn't add properties which
depend on non-upstream software (if an upstream alternative exists). Also
I'm not sure what happens if somebody doesn't use downstream bootloader
and PSCI can't be found: Would the board still be able to boot?
You most likely need that because you have downstream bootloader
installed on this board. PSCI implementation takes place in TEE-OS
for Rockchips ARM SoCs. There is no support for RK3036 in upstream
op-tee OS. It's pretty much the same for RK3128 and RK3288.
If you use upstream u-boot it should be good as-is.
Unfortunately, upstream u-boot also cannot boot up on this board.
At present, I haven't had time to debug what is going on.
Another reason I want to use downstream u-boot it is: I try run
this board with mainline just because i want to test some community
patches about inno-hdmi driver, as you said "the inno-hdmi driver
currently gets a lot of attention"[0]
Thanks for helping testing this.
Alex
With a downstream u-boot I can easy switch between upstream kernel and
downstream kernel(no need to replace other components)
if I found some function is not work as expected.
[0]https://patchwork.kernel.org/project/linux-rockchip/cover/20231219170100.188800-1-knaerzche@xxxxxxxxx/
Alex
timer {
compatible = "arm,armv7-timer";
arm,cpu-registers-not-fw-configured;
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
