The GCC block on SM6375 is powered by the VDD_CX rail. We need to ensure
that CX is enabled to prevent unwanted power collapse and that the
reference is dropped when unused so that the system can enter a
firmware-managed lower power state.
Enable runtime PM to keep the power flowing only when necessary.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
drivers/clk/qcom/gcc-sm6375.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/gcc-sm6375.c b/drivers/clk/qcom/gcc-sm6375.c
index 44c74e74885f..dff0b2f20759 100644
--- a/drivers/clk/qcom/gcc-sm6375.c
+++ b/drivers/clk/qcom/gcc-sm6375.c
@@ -8,6 +8,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <dt-bindings/clock/qcom,sm6375-gcc.h>
@@ -3785,13 +3786,25 @@ static int gcc_sm6375_probe(struct platform_device *pdev)
struct regmap *regmap;
int ret;
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret)
+ return ret;
+
regmap = qcom_cc_map(pdev, &gcc_sm6375_desc);
- if (IS_ERR(regmap))
+ if (IS_ERR(regmap)) {
+ pm_runtime_put(&pdev->dev);
return PTR_ERR(regmap);
+ }
ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks, ARRAY_SIZE(gcc_dfs_clocks));
- if (ret)
+ if (ret) {
+ pm_runtime_put(&pdev->dev);
return ret;
+ }
qcom_branch_set_clk_en(regmap, 0x17028); /* GCC_CAMERA_XO_CLK */
qcom_branch_set_clk_en(regmap, 0x2b004); /* GCC_CPUSS_GNOC_CLK */
@@ -3807,7 +3820,10 @@ static int gcc_sm6375_probe(struct platform_device *pdev)
clk_lucid_pll_configure(&gpll8, regmap, &gpll8_config);
clk_zonda_pll_configure(&gpll9, regmap, &gpll9_config);
- return qcom_cc_really_probe(pdev, &gcc_sm6375_desc, regmap);
+ ret = qcom_cc_really_probe(pdev, &gcc_sm6375_desc, regmap);
+ pm_runtime_put(&pdev->dev);
+
+ return ret;
}
static struct platform_driver gcc_sm6375_driver = {
--
2.43.0
