From: Rafał Miłecki <rafal@xxxxxxxxxx>
1. Prefer kzalloc() over kcalloc()
See memory-allocation.rst which says: "to be on the safe side it's
best to use routines that set memory to zero, like kzalloc()"
2. Drop dev_err() for u_boot_env_add_cells() fail
It can fail only on -ENOMEM. We don't want to print error then.
3. Add extra "crc32_addr" variable
It makes code reading header's crc32 easier to understand / review.
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
V2: New patch with suggestions from Miquel
drivers/nvmem/u-boot-env.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
index 111905189341..befbab156cda 100644
--- a/drivers/nvmem/u-boot-env.c
+++ b/drivers/nvmem/u-boot-env.c
@@ -132,6 +132,7 @@ static int u_boot_env_parse(struct u_boot_env *priv)
size_t crc32_data_offset;
size_t crc32_data_len;
size_t crc32_offset;
+ __le32 *crc32_addr;
size_t data_offset;
size_t data_len;
size_t dev_size;
@@ -143,7 +144,7 @@ static int u_boot_env_parse(struct u_boot_env *priv)
dev_size = nvmem_dev_size(nvmem);
- buf = kcalloc(1, dev_size, GFP_KERNEL);
+ buf = kzalloc(dev_size, GFP_KERNEL);
if (!buf) {
err = -ENOMEM;
goto err_out;
@@ -175,7 +176,8 @@ static int u_boot_env_parse(struct u_boot_env *priv)
data_offset = offsetof(struct u_boot_env_image_broadcom, data);
break;
}
- crc32 = le32_to_cpu(*(__le32 *)(buf + crc32_offset));
+ crc32_addr = (__le32 *)(buf + crc32_offset);
+ crc32 = le32_to_cpu(*crc32_addr);
crc32_data_len = dev_size - crc32_data_offset;
data_len = dev_size - data_offset;
@@ -188,8 +190,6 @@ static int u_boot_env_parse(struct u_boot_env *priv)
buf[dev_size - 1] = '\0';
err = u_boot_env_add_cells(priv, buf, data_offset, data_len);
- if (err)
- dev_err(dev, "Failed to add cells: %d\n", err);
err_kfree:
kfree(buf);
--
2.35.3
