Firmware node has more than fpga, aes and clock child nodes but also power,
reset, gpio, pinctrl and pcap which are not described yet.
All of them have binding in separate files but there is missing connection
to firmware node that's why describe it.
Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
---
.../firmware/xilinx/xlnx,zynqmp-firmware.yaml | 31 +++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
index 3d578f98ae2c..0662544f86f0 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
@@ -53,6 +53,37 @@ properties:
vector.
type: object
+ zynqmp-power:
+ $ref: /schemas/power/reset/xlnx,zynqmp-power.yaml#
+ description: The zynqmp-power node describes the power management
+ configurations. It will control remote suspend/shutdown interfaces.
+ type: object
+
+ reset-controller:
+ $ref: /schemas/reset/xlnx,zynqmp-reset.yaml#
+ description: The reset-controller node describes connection to the reset
+ functionality via firmware interface.
+ type: object
+
+ gpio:
+ $ref: /schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#
+ description: The gpio node describes connect to PS_MODE pins via firmware
+ interface.
+ type: object
+
+ pinctrl:
+ $ref: /schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
+ description: The pinctrl node provides access to pinconfig and pincontrol
+ functionality available in firmware.
+ type: object
+
+ pcap:
+ $ref: /schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml
+ description: The ZynqMP SoC uses the PCAP (Processor Configuration Port) to
+ configure the Programmable Logic (PL). The configuration uses the
+ firmware interface.
+ type: object
+
clock-controller:
$ref: /schemas/clock/xlnx,versal-clk.yaml#
description: The clock controller is a hardware block of Xilinx versal
--
2.36.1
