RE: [PATCH v7 0/3] can: xilinx_can: Add ECC feature support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ping!

>-----Original Message-----
>From: Srinivas Goud <srinivas.goud@xxxxxxx>
>Sent: Monday, November 27, 2023 3:58 PM
>To: wg@xxxxxxxxxxxxxx; mkl@xxxxxxxxxxxxxx; davem@xxxxxxxxxxxxx;
>edumazet@xxxxxxxxxx; kuba@xxxxxxxxxx; pabeni@xxxxxxxxxx;
>robh+dt@xxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx; conor+dt@xxxxxxxxxx;
>p.zabel@xxxxxxxxxxxxxx
>Cc: git (AMD-Xilinx) <git@xxxxxxx>; michal.simek@xxxxxxxxxx; linux-
>can@xxxxxxxxxxxxxxx; netdev@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
>linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
>appana.durga.rao@xxxxxxxxxx; Goud, Srinivas <srinivas.goud@xxxxxxx>
>Subject: [PATCH v7 0/3] can: xilinx_can: Add ECC feature support
>
>Add ECC feature support to Tx and Rx FIFOs for Xilinx CAN Controller.
>ECC is an IP configuration option where counter registers are added in IP for
>1bit/2bit ECC errors count and reset.
>Also driver reports 1bit/2bit ECC errors for FIFOs based on ECC error interrupts.
>
>Add xlnx,has-ecc optional property for Xilinx AXI CAN controller to support ECC
>if the ECC block is enabled in the HW.
>
>Add ethtool stats interface for getting all the ECC errors information.
>
>There is no public documentation for it available.
>
>---
>BRANCH: linux-can-next/master
>
>Changes in v7:
>Update with spinlock only for stats counters
>
>Changes in v6:
>Update commit description
>
>Changes in v5:
>Fix review comments
>Change the sequence of updates the stats Add get_strings and get_sset_count
>stats interface Use u64 stats helper function
>
>Changes in v4:
>Fix DT binding check warning
>Update xlnx,has-ecc property description
>
>Changes in v3:
>Update mailing list
>Update commit description
>
>Changes in v2:
>Address review comments
>Add ethtool stats interface
>Update commit description
>
>
>Srinivas Goud (3):
>  dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
>  can: xilinx_can: Add ECC support
>  can: xilinx_can: Add ethtool stats interface for ECC errors
>
> .../devicetree/bindings/net/can/xilinx,can.yaml    |   5 +
> drivers/net/can/xilinx_can.c                       | 159 ++++++++++++++++++++-
> 2 files changed, 160 insertions(+), 4 deletions(-)
>
>--
>2.1.1






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux