Hi,
On 19-01-15 14:35, Hans de Goede wrote:
Hi,
On 19-01-15 14:20, Maxime Ripard wrote:
Hi Hans,
On Mon, Jan 19, 2015 at 02:01:17PM +0100, Hans de Goede wrote:
Testing has shown that on sun4i the display backend engine does not have
deep enough fifo-s causing flickering / tearing in full-hd mode due to
fifo underruns. This can be avoided by letting the display frontend engine
do the dma from memory, and then letting it feed the data directly into
the backend unmodified, as the frontend does have deep enough fifo-s.
Note since u-boot-v2015.01 has been released using the de_be0-lcd0-hdmi
pipeline on sun4i, we need to keep that one around too (unfortunately).
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index f5e35b5..ccd60e3 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -44,6 +44,14 @@
<&ahb_gates 44>;
status = "disabled";
};
+
+ framebuffer@1 {
+ compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+ <&ahb_gates 44>, <&ahb_gates 46>;
+ status = "disabled";
+ };
Thanks for this.
I do have a question though, maybe I'm missing something, but what
would prevent us from using the existing node already? The output
pipeline seems to be the same, at least for which output we
use. Wether we use or not the display frontend looks like an
implementation detail.
The purpose of having a node per pipeline is to have the rights clocks
listed for the pipeline chosen. So the "de_fe0-de_be0-lcd0-hdmi" node
has one ahb_gates entry more so as to make sure the kernel does not gate
off the frontend.
The idea of having different nodes per pipeline is that when we get
support for more module clocks in place, as a preparation for kms
support, we can add the module clocks to the relevant nodes, to also
ensure the module clocks will not get turned off.
By having this info in the dtb, rather then in u-boot we can update
the clocks list as we add new clock nodes in the dtb, ensuring that
an older u-boot will keep working as we add support for module
clocks, etc.
Hmm, thinking more about this, and about how u-boot searches for
the simplefb node, I think that having a single node like this:
framebuffer@0 {
compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
/* This node is for de_fe0-de_be0-lcd0-hdmi, but we also declare de_be0-lcd0-hdmi
for compatibility with u-boot-v2015.01 which does not use the frontend */
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi", "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>, <&ahb_gates 46>;
status = "disabled";
};
Should work, but this will cause simplefb to enable the frontend ahb gate
even if it is not used (this will only impact u-boot-v2015.01 users), and as
such feels wrong, so I would prefer to go with my patch as is.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
