Hello.
On 1/19/2015 1:27 AM, Paul Burton wrote:
Add binding documentation for the Ingenic jz4740 interrupt controller.
Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
.../interrupt-controller/ingenic,jz4740-intc.txt | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt
new file mode 100644
index 0000000..3c06ef1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt
@@ -0,0 +1,24 @@
+Ingenic jz4740 SoC Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ingenic,jz4740-intc"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+- interrupt-parent: phandle of the CPU interrupt controller.
+- interrupts - Specifies the CPU interrupt the controller is connected to.
+
+Example:
+
+intc: intc@10001000 {
The node name should be "interrupt-controller@10001000", according to the
ePAPR standard.
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
