The Gunyah Resource Manager applies a devicetree overlay describing the virtual platform configuration of the guest VM, such as the message queue capability IDs for communicating with the Resource Manager. This information is not otherwise discoverable by a VM: the Gunyah hypervisor core does not provide a direct interface to discover capability IDs nor a way to communicate with RM without having already known the corresponding message queue capability ID. Add the DT bindings that Gunyah adheres for the hypervisor node and message queues. Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Elliot Berman <quic_eberman@xxxxxxxxxxx> --- .../bindings/firmware/gunyah-hypervisor.yaml | 82 ++++++++++++++++++++++ 1 file changed, 82 insertions(+) diff --git a/Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml b/Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml new file mode 100644 index 000000000000..cdeb4885a807 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/gunyah-hypervisor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Gunyah Hypervisor + +maintainers: + - Prakruthi Deepak Heragu <quic_pheragu@xxxxxxxxxxx> + - Elliot Berman <quic_eberman@xxxxxxxxxxx> + +description: |+ + Gunyah virtual machines use this information to determine the capability IDs + of the message queues used to communicate with the Gunyah Resource Manager. + See also: https://github.com/quic/gunyah-resource-manager/blob/develop/src/vm_creation/dto_construct.c + +properties: + compatible: + const: gunyah-hypervisor + + "#address-cells": + description: Number of cells needed to represent 64-bit capability IDs. + const: 2 + + "#size-cells": + description: must be 0, because capability IDs are not memory address + ranges and do not have a size. + const: 0 + +patternProperties: + "^gunyah-resource-mgr(@.*)?": + type: object + description: + Resource Manager node which is required to communicate to Resource + Manager VM using Gunyah Message Queues. + + properties: + compatible: + const: gunyah-resource-manager + + reg: + items: + - description: Gunyah capability ID of the TX message queue + - description: Gunyah capability ID of the RX message queue + + interrupts: + items: + - description: Interrupt for the TX message queue + - description: Interrupt for the RX message queue + + additionalProperties: false + + required: + - compatible + - reg + - interrupts + +additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + hypervisor { + #address-cells = <2>; + #size-cells = <0>; + compatible = "gunyah-hypervisor"; + + gunyah-resource-mgr@0 { + compatible = "gunyah-resource-manager"; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, /* TX allowed IRQ */ + <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; /* RX requested IRQ */ + reg = <0x00000000 0x00000000>, /* TX capability ID */ + <0x00000000 0x00000001>; /* RX capability ID */ + }; + }; -- 2.43.0
