Re: [PATCH v3] dt-bindings: iommu: Convert msm,iommu-v0 to yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you, sent V4.
David

On 12/01/2022 03:08, Rob Herring wrote:
On Sat, Jan 08, 2022 at 07:41:42PM +0100, David Heidelberg wrote:
Convert Qualcomm IOMMU v0 implementation to yaml format.

Signed-off-by: David Heidelberg <david@xxxxxxx>
---
v2:
  - fix wrong path in binding $id
  - comment qcom,mdp4 node example (we don't want to validate it yet)

v3:
  - I kept the name as -v0, since we have other binding -v1 and it look
    good, I can change thou in v4 if requested.
The preference is to use compatible strings for filenames. There's
little reason not to do that here.

  - dropped non-existent smmu_clk part (and adjusted example, which was
    using it)
  - dropped iommu description
  - moved iommu-cells description to the property #iommu-cells
Signed-off-by: David Heidelberg <david@xxxxxxx>
---
  .../bindings/iommu/msm,iommu-v0.txt           | 64 -------------
  .../bindings/iommu/qcom,iommu-v0.yaml         | 91 +++++++++++++++++++
  2 files changed, 91 insertions(+), 64 deletions(-)
  delete mode 100644 Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
  create mode 100644 Documentation/devicetree/bindings/iommu/qcom,iommu-v0.yaml

diff --git a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
deleted file mode 100644
index 20236385f26e..000000000000
--- a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* QCOM IOMMU
-
-The MSM IOMMU is an implementation compatible with the ARM VMSA short
-descriptor page tables. It provides address translation for bus masters outside
-of the CPU, each connected to the IOMMU through a port called micro-TLB.
-
-Required Properties:
-
-  - compatible: Must contain "qcom,apq8064-iommu".
-  - reg: Base address and size of the IOMMU registers.
-  - interrupts: Specifiers for the MMU fault interrupts. For instances that
-    support secure mode two interrupts must be specified, for non-secure and
-    secure mode, in that order. For instances that don't support secure mode a
-    single interrupt must be specified.
-  - #iommu-cells: The number of cells needed to specify the stream id. This
-		  is always 1.
-  - qcom,ncb:	  The total number of context banks in the IOMMU.
-  - clocks	: List of clocks to be used during SMMU register access. See
-		  Documentation/devicetree/bindings/clock/clock-bindings.txt
-		  for information about the format. For each clock specified
-		  here, there must be a corresponding entry in clock-names
-		  (see below).
-
-  - clock-names	: List of clock names corresponding to the clocks specified in
-		  the "clocks" property (above).
-		  Should be "smmu_pclk" for specifying the interface clock
-		  required for iommu's register accesses.
-		  Should be "smmu_clk" for specifying the functional clock
-		  required by iommu for bus accesses.
-
-Each bus master connected to an IOMMU must reference the IOMMU in its device
-node with the following property:
-
-  - iommus: A reference to the IOMMU in multiple cells. The first cell is a
-	    phandle to the IOMMU and the second cell is the stream id.
-	    A single master device can be connected to more than one iommu
-	    and multiple contexts in each of the iommu. So multiple entries
-	    are required to list all the iommus and the stream ids that the
-	    master is connected to.
-
-Example: mdp iommu and its bus master
-
-                mdp_port0: iommu@7500000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "smmu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc MDP_AXI_CLK>;
-			reg = <0x07500000 0x100000>;
-			interrupts =
-			    <GIC_SPI 63 0>,
-			    <GIC_SPI 64 0>;
-			qcom,ncb = <2>;
-		};
-
-		mdp: qcom,mdp@5100000 {
-			compatible = "qcom,mdp";
-			...
-			iommus = <&mdp_port0 0
-				  &mdp_port0 2>;
-		};
diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu-v0.yaml b/Documentation/devicetree/bindings/iommu/qcom,iommu-v0.yaml
new file mode 100644
index 000000000000..a506e8ad8902
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/qcom,iommu-v0.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: "http://devicetree.org/schemas/iommu/qcom,iommu-v0.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: Qualcomm IOMMU for APQ8064
+
+maintainers:
+  - Will Deacon <will@xxxxxxxxxx>
+
+description: >
+  The MSM IOMMU is an implementation compatible with the ARM VMSA short
+  descriptor page tables. It provides address translation for bus masters
+  outside of the CPU, each connected to the IOMMU through a port called micro-TLB.
+
+properties:
+  compatible:
+    const: qcom,apq8064-iommu
+
+  clocks:
+    items:
+      - description: interface clock for register accesses
+      - description: functional clock for bus accesses
+
+  clock-names:
+    items:
+      - const: smmu_pclk
+      - const: iommu_clk
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Specifiers for the MMU fault interrupts.
+    minItems: 1
+    items:
+      - description: non-secure mode interrupt
+      - description: secure mode interrupt (for instances which supports it)
+
+  "#iommu-cells":
+    const: 1
+    description: |
+      The first cell is a phandle to the IOMMU and
+      the second cell is the stream id.
+      A single master device can be connected to more than one iommu
+      and multiple contexts in each of the iommu.
+      So multiple entries are required to list all the iommus and
+      the stream ids that the master is connected to.
+
+  qcom,ncb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The total number of context banks in the IOMMU.
+
+required:
+  - clocks
+  - clock-names
+  - reg
+  - interrupts
+  - qcom,ncb
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+
+    mdp_port0: iommu@7500000 {
+            compatible = "qcom,apq8064-iommu";
+            #iommu-cells = <1>;
+            clock-names =
+                "smmu_pclk",
+                "iommu_clk";
+            clocks =
+                <&clk SMMU_AHB_CLK>,
+                <&clk MDP_AXI_CLK>;
+            reg = <0x07500000 0x100000>;
+            interrupts =
+                <0 63 0>,
+                <0 64 0>;
+            qcom,ncb = <2>;
+    };
+
+    /* mdp: mdp@5100000 {
+            compatible = "qcom,mdp4";
+            ...
+
+            iommus = <&mdp_port0 0
+                      &mdp_port0 2>;
+    };*/
--
2.34.1


--
David Heidelberg





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux