Re: [net-next PATCH v3 1/4] dt-bindings: net: phy: Document new LEDs active-low property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13/12/2023 12:13, Christian Marangi wrote:
> Document new LEDs active-low property to define if the LED require to be
> set low to be turned on.
> 
> active-low can be defined in the leds node for PHY that apply the LED
> polarity globally for each attached LED or in the specific led node for
> PHY that supports setting the LED polarity per LED.
> 
> Declaring both way is not supported and will result in the schema
> getting rejected.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---
> Changes v3:
> - Out of RFC
> Changes v2:
> - Add this patch
> 
>  .../devicetree/bindings/net/ethernet-phy.yaml | 20 +++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> index 8fb2a6ee7e5b..9cb3981fed2a 100644
> --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> @@ -213,6 +213,11 @@ properties:
>        '#size-cells':
>          const: 0
>  
> +      'active-low':

Drop quotes, no need for them.

As pointed out in other patchset, bool might not be enough.
https://lore.kernel.org/all/74cb1d1c-64b8-4fb0-9e6d-c2fad8417232@xxxxxxx/
Anyway, both cases probably needs to be considered here.

Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux