On 12/15/2023 6:19 PM, Krzysztof Kozlowski wrote:
On 15/12/2023 10:49, Jie Luo wrote:
On 12/15/2023 3:29 PM, Krzysztof Kozlowski wrote:
On 15/12/2023 07:46, Jie Luo wrote:
On 12/15/2023 1:12 AM, Conor Dooley wrote:
On Wed, Dec 13, 2023 at 04:26:56PM +0800, Jie Luo wrote:
On 12/13/2023 12:06 AM, Conor Dooley wrote:
On Tue, Dec 12, 2023 at 07:51:50PM +0800, Luo Jie wrote:
Update the yaml file for the new DTS properties.
1. cmn-reference-clock for the CMN PLL source clock select.
2. clock-frequency for MDIO clock frequency config.
3. add uniphy AHB & SYS GCC clocks.
4. add reset-gpios for MDIO bus level reset.
Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
---
.../bindings/net/qcom,ipq4019-mdio.yaml | 157 +++++++++++++++++-
1 file changed, 153 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
index 3407e909e8a7..9546a6ad7841 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
@@ -20,6 +20,8 @@ properties:
- enum:
- qcom,ipq6018-mdio
- qcom,ipq8074-mdio
+ - qcom,ipq9574-mdio
+ - qcom,ipq5332-mdio
- const: qcom,ipq4019-mdio
"#address-cells":
@@ -30,19 +32,71 @@ properties:
reg:
minItems: 1
- maxItems: 2
+ maxItems: 5
description:
- the first Address and length of the register set for the MDIO controller.
- the second Address and length of the register for ethernet LDO, this second
- address range is only required by the platform IPQ50xx.
+ the first Address and length of the register set for the MDIO controller,
+ the optional second, third and fourth address and length of the register
+ for ethernet LDO, these three address range are required by the platform
+ IPQ50xx/IPQ5332/IPQ9574, the last address and length is for the CMN clock
+ to select the reference clock.
+
+ reg-names:
+ minItems: 1
+ maxItems: 5
clocks:
+ minItems: 1
items:
- description: MDIO clock source frequency fixed to 100MHZ
+ - description: UNIPHY0 AHB clock source frequency fixed to 100MHZ
+ - description: UNIPHY1 AHB clock source frequency fixed to 100MHZ
+ - description: UNIPHY0 SYS clock source frequency fixed to 24MHZ
+ - description: UNIPHY1 SYS clock source frequency fixed to 24MHZ
clock-names:
+ minItems: 1
items:
- const: gcc_mdio_ahb_clk
+ - const: gcc_uniphy0_ahb_clk
+ - const: gcc_uniphy1_ahb_clk
+ - const: gcc_uniphy0_sys_clk
+ - const: gcc_uniphy1_sys_clk
+ cmn-reference-clock:
+ oneOf:
+ - items:
+ - enum:
+ - 0 # CMN PLL reference internal 48MHZ
+ - 1 # CMN PLL reference external 25MHZ
+ - 2 # CMN PLL reference external 31250KHZ
+ - 3 # CMN PLL reference external 40MHZ
+ - 4 # CMN PLL reference external 48MHZ
+ - 5 # CMN PLL reference external 50MHZ
+ - 6 # CMN PLL reference internal 96MHZ
Why is this not represented by an element of the clocks property?
This property is for the reference clock source selection of CMN PLL,
CMN PLL generates the different clock rates for the different Ethernet
blocks, this CMN PLL configuration is not located in the GCC, so the
clock framework can't be used, which is the general hardware register
instead of RCG register for GCC.
I don't see how the clock being provided by the "GCC" (whatever that is)
or by some other clock controller or fixed clock makes a difference.
Why can't the other clock provider be represented in the devicetree?
cmn-reference-clock is for selecting the reference clock source for the
whole Ethernet block, which is just the standalone configure register.
Sure, you are aware though that all clocks are just configure registers?
Which clocks are these mentioned in the property? From where do they come?
Anyway, property is in existing form is not correct - this is not a
generic property.
This property cmn-reference-clock is just the hardware register
configuration, since the different IPQ platform needs to select
the different reference clock source for the CMN PLL block that
provides the various clock outputs to the all kinds of Ethernet
devices, which is not from GCC provider.
AGAIN: where do the clocks come from? Which device generates them?
Oh, OK, the reference clock is from wifi that provides 48MHZ to
Ethernet block.
This is indeed not a generic property, which is the Ethernet
function configs same as clock-frequency.
Then it should not be made as a generic property...
sure, i saw your another comments, will prefix qcom_ on this property.
Best regards,
Krzysztof
