On 12/14/23 17:14, Alexandre TORGUE wrote:
> Hi Uwe
>
> On 12/6/23 09:48, Uwe Kleine-König wrote:
>> Hello,
>>
>> On Wed, Dec 06, 2023 at 09:31:43AM +0100, Uwe Kleine-König wrote:
>>> diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
>>> b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
>>> index 511113f2e399..704c0d0cfe5f 100644
>>> --- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
>>> +++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
>>> @@ -680,8 +680,6 @@ &usart3 {
>>> };
>>> &usbh_ehci {
>>> - phys = <&usbphyc_port0>;
>>> - status = "okay";
>>
>> the status property must be kept. I will wait a bit for further review
>> and then resend (unless this patch is picked up with this issue fixed
>> up).
>
> Applied with the fix. First I had a small doubt about the patch as we
> can also choose usbphyc_port1 for USB host but as usbphyc_port0 remains
> always connected to the USB host then your patch makes completely sens.
Hi UWe, Alex,
I tested it, with the fix, on stm32mp157c-ev1 and stm32mp157c-dk2. You
can add my:
Tested-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
Best Regards,
Fabrice
>
> Regards
> Alex
>
>
>> Best regards
>> Uwe
>>
> _______________________________________________
> Linux-stm32 mailing list
> Linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
> https://st-md-mailman.stormreply.com/mailman/listinfo/linux-stm32
