On Wed, 2023-12-13 at 09:05 +0100, Krzysztof Kozlowski wrote: > > External email : Please do not click links or open attachments until > you have verified the sender or the content. > On 13/12/2023 07:35, Chunfeng Yun wrote: > > For Gen1 isoc-in endpoint on controller before about SSUSB IPM > v1.6.0, it > > still send out unexpected ACK after receiving a short packet in > burst > > transfer, this will cause an exception on connected device, > specially for > > a 4k camera. > > Add a quirk property "mediatek,rxfifo-depth" to work around this > hardware > > issue; > > The side-effect is that may cause performance drop about 10%, > including > > bulk transfer. > > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> > > --- > > .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 10 > ++++++++++ > > 1 file changed, 10 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk- > xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk- > xhci.yaml > > index e9644e333d78..b8ed68574ba4 100644 > > --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > > +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > > @@ -124,6 +124,16 @@ properties: > > defined in the xHCI spec on MTK's controller. > > default: 5000 > > > > + mediatek,rxfifo-depth: > > + description: > > The property description and driver patch suggest you configure the > depth of FIFO, so this should be not bool, but some uint32. And then, > use generic "fifo-depth" property to set desired depth. I fix it as 2, it's OK to use a uint32, I'll modify it. Thanks > > > Best regards, > Krzysztof > >