This dts adds support for Motorola Moto G 4G released in 2013.
Add a device tree with initial support for:
- GPIO keys
- Hall sensor
- SDHCI
- Vibrator
Signed-off-by: André Apitzsch <git@xxxxxxxxxxx>
---
arch/arm/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/qcom-msm8926-motorola-peregrine.dts | 291 +++++++++++++++++++++
2 files changed, 292 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index 0cb272f4fa45..9cc1e14e6cd0 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8926-htc-memul.dtb \
qcom-msm8926-microsoft-superman-lte.dtb \
qcom-msm8926-microsoft-tesla.dtb \
+ qcom-msm8926-motorola-peregrine.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8960-samsung-expressatt.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
new file mode 100644
index 000000000000..0cbe2d2fbbb1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+ model = "Motorola Moto G 4G (2013)";
+ compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ };
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer0: framebuffer@3200000 {
+ compatible = "simple-framebuffer";
+ reg = <0x03200000 0x800000>;
+ width = <720>;
+ height = <1280>;
+ stride = <(720 * 3)>;
+ format = "r8g8b8";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@3200000 {
+ reg = <0x03200000 0x800000>;
+ no-map;
+ };
+
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+ };
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ sensor@48 {
+ compatible = "ti,tmp108";
+ reg = <0x48>;
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+};
+
+&pm8226_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ };
+
+ pm8226_lvs1: lvs1 {
+ /* Pull-up for I2C lines */
+ regulator-always-on;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ bus-width = <8>;
+ non-removable;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8226_l18>;
+ vqmmc-supply = <&pm8226_l21>;
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>;
+
+ status = "okay";
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <2000000>;
+ qcom,fast-charge-current-limit = <1900000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,minimum-input-voltage = <4300000>;
+
+ status = "okay";
+};
+
+&usb {
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
--
2.43.0
