On Thursday, December 14, 2023 2:53:09 AM CET Andre Przywara wrote: > A quick update, with the few fixes for issues that reviewers spotted. > See below for a changelog. > ================================ > > The Transpeed 8K618-T is one example of various cheap Chinese TV boxes > using the Allwinner H618 SoC. It comes with up to 4GB DRAM and up to > 128GB eMMC flash, plus the usual HDMI, 100Mbit Ethernet, WiFi/BT and > dual USB ports, not to forget the mandatory microSD card slot. > More details: https://linux-sunxi.org/Transpeed_8K618-T > > Ethernet relies on the yet unsupported integrated PHY, and the HDMI > output is similarly not yet supported, but patches exist that await > polishing for mainline submission. > Meanwhile USB and eMMC plus SD card work, so you can hook up an USB > Ethernet or WiFi adapter to get things going. > > This series is the usual trilogy of DT support patches: adding the vendor > name in patch 1, the board compatible name in patch 2, and the actual > .dts file in patch 3. > > Please have a look! Applied, thanks! Best regards, Jernej > > Thanks, > Andre > > Changelog v1 .. v2: > - fix alphabetical ordering in vendor-prefixes > - remove unneeded UART1 alias > - extend regulator names, drop now redundant comments > > Andre Przywara (3): > dt-bindings: vendor-prefixes: add Transpeed > dt-bindings: arm: sunxi: document Transpeed 8K618-T board name > arm64: dts: allwinner: h618: add Transpeed 8K618-T TV box > > .../devicetree/bindings/arm/sunxi.yaml | 5 + > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > arch/arm64/boot/dts/allwinner/Makefile | 1 + > .../sun50i-h618-transpeed-8k618-t.dts | 161 ++++++++++++++++++ > 4 files changed, 169 insertions(+) > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts > >
