On Thu, Dec 14, 2023 at 04:44:46PM +0530, Viresh Kumar wrote: > On 14-12-23, 11:33, Brandon Cheo Fusi wrote: > > Two OPPs are currently defined for the D1/D1s; one at 408MHz and > > another at 1.08GHz. Switching between these can be done with the > > "sun50i-cpufreq-nvmem" driver. This patch populates the opp table > > appropriately, with inspiration from > > https://github.com/Tina-Linux/linux-5.4/blob/master/arch/riscv/boot/dts/sunxi/sun20iw1p1.dtsi > > > > The supply voltages are PWM-controlled, but support for that IP > > is still in the works. So stick to a fixed 0.9V vdd-cpu supply, > > which seems to be the default on most D1 boards. > > > > Signed-off-by: Brandon Cheo Fusi <fusibrandon13@xxxxxxxxx> > > --- > > arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 18 +++++++++++++++--- > > 1 file changed, 15 insertions(+), 3 deletions(-) > > > > diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi > > index 64c3c2e6c..e211fe4c7 100644 > > --- a/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi > > +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi > > @@ -39,16 +39,22 @@ cpu0_intc: interrupt-controller { > > }; > > > > opp_table_cpu: opp-table-cpu { > > - compatible = "operating-points-v2"; > > + compatible = "allwinner,sun20i-d1-operating-points", > > I don't think you should add a new compatible for every SoC that needs > to be supported by a DT bindings and cpufreq driver. Maybe you should > just reuse "allwinner,sun50i-h6-operating-points" and it will work > fine for you ? > > Rob ? The driver can definitely just reuse sun50i-h6, but the binding and devicetree should have a soc-specific compatible for the sun20i-d1. That said, the compatible does need to be documented, there's a dt-bindings patch missing from this series. Cheers, Conor.
Attachment:
signature.asc
Description: PGP signature
