Re: [PATCH v4 6/9] arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 13/12/23 16:04, Chen-Yu Tsai ha scritto:
Tentacruel and Tentacool are MT8186 based Chromebooks based on the
Krabby design.

Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a
convertible device with touchscreen and stylus.

Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop
device. It does not have a touchscreen or stylus.

The two devices both have two variants. The difference is a second
source touchpad controller that shares the same address as the original,
but is incompatible.

The extra SKU IDs for the Tentacruel devices map to different sensor
components attached to the Embedded Controller. These are not visible
to the main processor.

Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
Changes since v3:
- Reorder some properties to conform better to the newly proposed DT
   style guidelines
- Drop unused labels
- Rename bt-sco node name to bt-sco-codec
- Drop i2s*-share properties from afe node
- Drop aud_gpio_tdm_{on,off} pinctrl nodes
- Replace interrupts with interrupts-extended in tpm node
- Enable adsp device

Changes since v2:
- Picked up Conor's ack
- Rename touchpad to trackpad
- Drop pinctrl properties from trackpad in tentacruel/tentacool second
   source trackpad

Changes since v1:
- Reorder SKU numbers in descending order.
- Fixed pinconfig node names
- Moved pinctrl-* properties after interrupts-*
- Switched to interrupts-extended for external components
- Marked ADSP as explicitly disabled, with a comment explaining that it
   stalls the system
- Renamed "touchpad" to "trackpad"
- Dropped bogus "no-laneswap" property from it6505 node
- Moved "realtek,jd-src" property to after all the regulator supplies
- Switched to macros for MT6366 regulator "regulator-allowed-modes"
- Renamed "vgpu" regulator name to allow coupling, with a comment
   containing the name used in the design
- Renamed "cr50" node name to "tpm"
- Moved trackpad_pins reference up to i2c2; workaround for second source
   component resource sharing.
- Fix copyright year
- Fixed touchscreen supply name
---
  arch/arm64/boot/dts/mediatek/Makefile         |    4 +
  .../dts/mediatek/mt8186-corsola-krabby.dtsi   |  129 ++
  .../mt8186-corsola-tentacool-sku327681.dts    |   57 +
  .../mt8186-corsola-tentacool-sku327683.dts    |   24 +
  .../mt8186-corsola-tentacruel-sku262144.dts   |   44 +
  .../mt8186-corsola-tentacruel-sku262148.dts   |   26 +
  .../boot/dts/mediatek/mt8186-corsola.dtsi     | 1707 +++++++++++++++++
  7 files changed, 1991 insertions(+)
  create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
  create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
  create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
  create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
  create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
  create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index e6e7592a3645..442af61b1305 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -43,6 +43,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb

..snip..

diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
new file mode 100644
index 000000000000..447b57b12b41
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+#include "mt8186-corsola-tentacruel-sku262144.dts"
+
+/ {
+	compatible = "google,tentacruel-sku262151", "google,tentacruel-sku262150",
+		     "google,tentacruel-sku262149", "google,tentacruel-sku262148",
+		     "google,tentacruel", "mediatek,mt8186";
+};
+
+/* This variant replaces only the trackpad controller. */
+&i2c2 {
+	/delete-node/ trackpad@15;
+
+	trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
new file mode 100644
index 000000000000..adbeb0c765d3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
@@ -0,0 +1,1707 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8186.dtsi"
+#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
+

..snip..

+
+&i2c2 {
+	pinctrl-names = "default";
+	/*
+	 * Trackpad pin put here to work around second source components
+	 * sharing the pinmux in steelix designs.
+	 */
+	pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>;
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <10000>;
+	status = "okay";
+
+	trackpad@15 {
+		compatible = "elan,ekth3000";

You forgot to change this one.

Remove compatible from this node and stop using /delete-node/ in device specific
devicetrees.

+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};


corsola.dtsi (here):

&i2c2 {
	pinctrl-names = "default";
	/*
	 * Trackpad pin put here to work around second source components
	 * sharing the pinmux in steelix designs.
	 */
	pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>;
	clock-frequency = <400000>;
	i2c-scl-internal-delay-ns = <10000>;
	status = "okay";

	trackpad_i2c2_15: trackpad@15 {
		/*
		 * Those are common properties for i2c2 trackpad on Corsola boards.
		 * The compatible string is declared in device specific devicetrees
		 */
		reg = <0x15>;
		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
		vcc-supply = <&pp3300_s3>;
		wakeup-source;
		status = "disabled";
	};
};

corsola-some-device.dts:

&trackpad_i2c2_15 {
	compatible = "hid-over-i2c";
	hid-descr-addr = <0x0001>;
	status = "okay";
};

corsola-some-other-device.dts:

&trackpad_i2c2_15 {
	compatible = "elan,ekth3000";
	status = "okay";
};

....everything else looks good.

Cheers,
Angelo




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux