On Tue, Nov 28, 2023 at 02:02:16PM -0600, Adam Ford wrote:
> When the GPU nodes were added, the GPU_PLL_OUT was configured
> for 1000MHz, but this requires the SoC to run in overdrive mode
> which requires an elevated voltage operating point.
>
> Since this may run some boards out of spec, the default clock
> should be set to 800MHz for nominal operating mode. Boards
> that run at the higher voltage can update their clocks
> accordingly.
>
> Fixes: 4523be8e46be ("arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core")
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
Applied all, thanks!
