Added device tree binding documentation for Nuvoton BMC NPCM BIOS Post Code (BPC). The NPCM BPC monitoring two configurable I/O addresses written by the host on the bus. Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx> --- .../soc/nuvoton/nuvoton,npcm-bpc.yaml | 65 +++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-bpc.yaml diff --git a/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-bpc.yaml b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-bpc.yaml new file mode 100644 index 000000000000..c04302a1d52b --- /dev/null +++ b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-bpc.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/nuvoton/nuvoton,npcm-bpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton BMC NPCM BIOS Post Code (BPC) controller + +maintainers: + - Tomer Maimon <tmaimon77@xxxxxxxxx> + +description: + Nuvoton BMC NPCM BIOS Post Code (BPC) monitoring two configurable I/O + addresses written by the host on the bus, the capture data stored in + 128-word FIFO. + + NPCM BPC supports capture double words, when using capture + double word only I/O address 1 is monitored. + +properties: + compatible: + items: + - enum: + - nuvoton,npcm845-bpc + - nuvoton,npcm750-bpc + - const: nuvoton,npcm-bpc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nuvoton,monitor-ports: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Contain monitor I/O addresses on the bus, at least one monitor I/O + address required. + + nuvoton,bpc-en-dwcapture: + description: + Set DWCAPTURE bit in BPCFEN register that enable double words capture + according to the first address setting. + type: boolean + +required: + - compatible + - reg + - interrupts + - nuvoton,monitor-ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bpc: bpc@f0007040 { + compatible = "nuvoton,npcm750-bpc", "nuvoton,npcm-bpc"; + reg = <0xf0007040 0x20>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + nuvoton,monitor-ports = <0x80>; + }; +... -- 2.34.1