The series adds drivers for the displays used by bsh-smm-s2/pro boards. This required applying some patches to the samsung-dsim driver and the drm_bridge.c module. Changes in v7: - Drop [3/4] dt-bindings: display: panel: Add synaptics r63353 panel controller because applied. Changes in v6: - Drop patches: - [06/10] drm/panel: Add Synaptics R63353 panel driver - [07/10] dt-bindings: display: panel: Add Ilitek ili9805 panel controller - [08/10] drm/panel: Add Ilitek ILI9805 panel driver - [09/10] drm/panel: ilitek-ili9805: add support for Tianma TM041XDHG01 panel Because applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next) Drop patches: - [01/10] drm/bridge: Fix bridge disable logic - [02/10] drm/bridge: Fix a use case in the bridge disable logic Because they are wrong Changes in v3: - Replace "synaptics,r63353" compatible with "syna,r63353", as required by vendor-prefixes.yaml. - Squash patch [09/11] dt-bindings: ili9805: add compatible string for Tianma TM041XDHG01 into [07/11] dt-bindings: display: panel: Add Ilitek ili9805 panel controller. Changes in v2: - Adjust the mipi_dsi node based on the latest patches merged into the mainline in the dtsi files it includes. - Added to the series the following patches: - 0001 drm/bridge: Fix bridge disable logic - 0002 drm/bridge: Fix a use case in the bridge disable logic - 0003 samsung-dsim: enter display mode in the enable() callback - 0004 drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting Dario Binacchi (2): drm: bridge: samsung-dsim: enter display mode in the enable() callback drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting Michael Trimarchi (1): arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup .../freescale/imx8mn-bsh-smm-s2-common.dtsi | 1 + .../freescale/imx8mn-bsh-smm-s2-display.dtsi | 121 ++++++++++++++++++ drivers/gpu/drm/bridge/samsung-dsim.c | 14 +- 3 files changed, 133 insertions(+), 3 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi -- 2.43.0
