Greetings, This is v2 of a patchset that introduces pinmux support for the EMMA Mobile EV2 board to the sh-pfc pin-controller driver. Devicetree bindings for gpio and the populated serial connector are also defined in 3/4 and 4/4. Changes since v1: * GPIOs numbered linearly instead of using a bank_number schema * Group pins in larger groups instead of one group per pin * Only define the actual 159 GPIOs instead of 160 * There are 23 pins per row not 25, correct PIN_NUMBER macro * Define one larger reg entry in dts for pfc instead of four small Niklas Söderlund (4): sh-pfc: add macro to define pinmux without function sh-pfc: Add emev2 pinmux support ARM: shmobile: emev2: Add PFC information to emev2.dtsi ARM: shmobile: emev2-kzm9d: Add PFC information for uart1 .../bindings/pinctrl/renesas,pfc-pinctrl.txt | 1 + arch/arm/boot/dts/emev2-kzm9d.dts | 13 + arch/arm/boot/dts/emev2.dtsi | 10 + drivers/pinctrl/sh-pfc/Kconfig | 5 + drivers/pinctrl/sh-pfc/Makefile | 1 + drivers/pinctrl/sh-pfc/core.c | 9 + drivers/pinctrl/sh-pfc/core.h | 1 + drivers/pinctrl/sh-pfc/pfc-emev2.c | 1774 ++++++++++++++++++++ drivers/pinctrl/sh-pfc/sh_pfc.h | 2 + 9 files changed, 1816 insertions(+) create mode 100644 drivers/pinctrl/sh-pfc/pfc-emev2.c -- 2.2.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
