From: Arnd Bergmann <arnd@xxxxxxxx> The pmic is connected to the GIC, which uses four-cell interrupt properties, but its interrupt is specified as two-cell that would only make sense for the GPIO irqchip: arch/arm64/boot/dts/mediatek/mt8195.dtsi:464.4-27: Warning (interrupts_property): /soc/i2c@11d01000/pmic@34:#interrupt-cells: size is (8), expected multiple of 16 Remove the interrupt for now to shut up the warning. When someone figures out what the correct interrupt and parent are, we can add it back. Fixes: f2b543a191b6 ("arm64: dts: mediatek: add device-tree for Genio 1200 EVK board") Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> --- arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts index 70b465f7c6a7..a409ef998746 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts @@ -238,8 +238,6 @@ &i2c6 { mt6360: pmic@34 { compatible = "mediatek,mt6360"; reg = <0x34>; - interrupts = <128 IRQ_TYPE_EDGE_FALLING>; - interrupt-names = "IRQB"; interrupt-controller; #interrupt-cells = <1>; pinctrl-0 = <&mt6360_pins>; -- 2.39.2