Hi Heiko:
At 2023-12-11 20:33:00, "Heiko Stübner" <heiko@xxxxxxxxx> wrote:
>Am Montag, 11. Dezember 2023, 11:50:43 CET schrieb Andy Yan:
>> Cool Pi CM5 EVB is a board based on rk3588.
>>
>> Specification:
>> - Rockchip RK3588
>> - LPDDR4 2/4/8/16 GB
>> - TF scard slot
>> - eMMC 8/32/64/128 GB module
>> - Gigabit ethernet x 1 with PHY YT8531
>> - Gigabit ethernet x 1 drived by PCIE with YT6801S
>> - HDMI Type A out x 2
>> - HDMI Type D in x 1
>> - USB 2.0 Host x 2
>> - USB 3.0 OTG x 1
>> - USB 3.0 Host x 1
>> - PCIE M.2 E Key for Wireless connection
>> - PCIE M.2 M Key for NVME connection
>> - 40 pin header
>>
>> Signed-off-by: Andy Yan <andyshrk@xxxxxxx>
>
>In the overall scheme of things I would really like to see the correct
>split between SoM dtsi and baseboard dts, like the other SoMs do.
>
>You said you wanted to wait for an actual second baseboard to come along
>before doing this and I guess for "yet another som" we can try going that
>route.
>
>But please state this explicitly in the commit message that this is a
>baseboard+som combination, so the next one working here should do
>that split.
>
>An update is needed anyway, cause the compatible thing mentioned in
>the binding.
>
I try to split it as a SoM dtsi + board dts in V4
>
>Thanks
>Heiko
>
>> ---
>>
>> Changes in v3:
>> - drop ununnecessary property status = "okay" for backlight
>> - reorder some nodes alphabetical
>> - drop ununnecessary blank line
>>
>> Changes in v2:
>> - change board compatible from "CoolPi CM5 EVB" to "coolpi,pi-cm5-evb"
>>
>> arch/arm64/boot/dts/rockchip/Makefile | 1 +
>> .../dts/rockchip/rk3588-coolpi-cm5-evb.dts | 879 ++++++++++++++++++
>> 2 files changed, 880 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
>> index e59682691eb0..9be8e4830158 100644
>> --- a/arch/arm64/boot/dts/rockchip/Makefile
>> +++ b/arch/arm64/boot/dts/rockchip/Makefile
>> @@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
>> new file mode 100644
>> index 000000000000..ccf17185dc10
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
>> @@ -0,0 +1,879 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
>> + *
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/leds/common.h>
>> +#include <dt-bindings/pwm/pwm.h>
>> +#include <dt-bindings/pinctrl/rockchip.h>
>> +#include "rk3588.dtsi"
>> +
>> +/ {
>> + model = "RK3588 CoolPi CM5 EVB";
>> + compatible = "coolpi,pi-cm5-evb", "rockchip,rk3588";
>> +
>> + aliases {
>> + mmc0 = &sdhci;
>> + mmc1 = &sdio;
>> + mmc2 = &sdmmc;
>> + serial2 = &uart2;
>> + };
>> +
>> + analog-sound {
>> + compatible = "audio-graph-card";
>> + label = "rk3588-es8316";
>> +
>> + widgets = "Microphone", "Mic Jack",
>> + "Headphone", "Headphones";
>> +
>> + routing = "MIC2", "Mic Jack",
>> + "Headphones", "HPOL",
>> + "Headphones", "HPOR";
>> +
>> + dais = <&i2s0_8ch_p0>;
>> + };
>> +
>> + backlight: backlight {
>> + compatible = "pwm-backlight";
>> + power-supply = <&vcc12v_dcin>;
>> + pwms = <&pwm2 0 25000 0>;
>> + enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&bl_en>;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial2:1500000n8";
>> + };
>> +
>> + leds: leds {
>> + compatible = "gpio-leds";
>> +
>> + led: led-green {
>> + color = <LED_COLOR_ID_GREEN>;
>> + function = LED_FUNCTION_STATUS;
>> + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
>> + linux,default-trigger = "heartbeat";
>> + };
>> + };
>> +
>> + vcc12v_dcin: vcc12v-dcin-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc12v_dcin";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <12000000>;
>> + regulator-max-microvolt = <12000000>;
>> + };
>> +
>> + vcc5v0_sys: vcc5v0-sys-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc5v0_sys";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + vin-supply = <&vcc12v_dcin>;
>> + };
>> +
>> + vcc3v3_sys: vcc3v3-sys-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc3v3_sys";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + vin-supply = <&vcc12v_dcin>;
>> + };
>> +
>> + vcc3v3_lcd: vcc3v3-lcd-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc3v3_lcd";
>> + enable-active-high;
>> + gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&lcdpwr_en>;
>> + vin-supply = <&vcc3v3_sys>;
>> + };
>> +
>> + avdd0v85_pcie20: avdd0v85-pcie20-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "avdd0v85_pcie20";
>> + regulator-boot-on;
>> + regulator-always-on;
>> + regulator-min-microvolt = <850000>;
>> + regulator-max-microvolt = <850000>;
>> + vin-supply = <&vdd_0v85_s0>;
>> + };
>> +
>> + avdd1v8_pcie20: avdd1v8-pcie20-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "avdd1v8_pcie20";
>> + regulator-boot-on;
>> + regulator-always-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + vin-supply = <&avcc_1v8_s0>;
>> + };
>> +
>> + avdd0v75_pcie30: avdd0v75-pcie30-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "avdd0v75_pcie30";
>> + regulator-boot-on;
>> + regulator-always-on;
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <750000>;
>> + vin-supply = <&avdd_0v75_s0>;
>> + };
>> +
>> + pcie30_avdd1v8: avdd1v8-pcie30-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "pcie30_avdd1v8";
>> + regulator-boot-on;
>> + regulator-always-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + vin-supply = <&avcc_1v8_s0>;
>> + };
>> +
>> + vcc5v0_host: vcc5v0-host-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc5v0_host";
>> + regulator-boot-on;
>> + regulator-always-on;
>> + enable-active-high;
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&vcc5v0_host1_en>;
>> + vin-supply = <&vcc5v0_sys>;
>> + };
>> +
>> + vcc5v0_otg: vcc5v0-otg-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc5v0_otg";
>> + regulator-boot-on;
>> + regulator-always-on;
>> + enable-active-high;
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&typec5v_pwren>;
>> + vin-supply = <&vcc5v0_sys>;
>> + };
>> +
>> + vcc_mipidphy0: vcc-mipi-dphy0-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc_mipidphy0";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + enable-active-high;
>> + gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
>> + vin-supply = <&vcc5v0_sys>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&cam_en>;
>> + };
>> +};
>> +
>> +&combphy0_ps {
>> + status = "okay";
>> +};
>> +
>> +&combphy1_ps {
>> + status = "okay";
>> +};
>> +
>> +&combphy2_psu {
>> + status = "okay";
>> +};
>> +
>> +&cpu_b0 {
>> + cpu-supply = <&vdd_cpu_big0_s0>;
>> +};
>> +
>> +&cpu_b1 {
>> + cpu-supply = <&vdd_cpu_big0_s0>;
>> +};
>> +
>> +&cpu_b2 {
>> + cpu-supply = <&vdd_cpu_big1_s0>;
>> +};
>> +
>> +&cpu_b3 {
>> + cpu-supply = <&vdd_cpu_big1_s0>;
>> +};
>> +
>> +&cpu_l0 {
>> + cpu-supply = <&vdd_cpu_lit_s0>;
>> +};
>> +
>> +&cpu_l1 {
>> + cpu-supply = <&vdd_cpu_lit_s0>;
>> +};
>> +
>> +&cpu_l2 {
>> + cpu-supply = <&vdd_cpu_lit_s0>;
>> +};
>> +
>> +&cpu_l3 {
>> + cpu-supply = <&vdd_cpu_lit_s0>;
>> +};
>> +
>> +&gmac0 {
>> + clock_in_out = "output";
>> + phy-handle = <&rgmii_phy>;
>> + phy-mode = "rgmii-rxid";
>> + pinctrl-0 = <&gmac0_miim
>> + &gmac0_tx_bus2
>> + &gmac0_rx_bus2
>> + &gmac0_rgmii_clk
>> + &gmac0_rgmii_bus>;
>> + pinctrl-names = "default";
>> + rx_delay = <0x00>;
>> + tx_delay = <0x43>;
>> + status = "okay";
>> +};
>> +
>> +&i2c0 {
>> + pinctrl-0 = <&i2c0m2_xfer>;
>> + status = "okay";
>> +
>> + vdd_cpu_big0_s0: regulator@42 {
>> + compatible = "rockchip,rk8602";
>> + reg = <0x42>;
>> + fcs,suspend-voltage-selector = <1>;
>> + regulator-name = "vdd_cpu_big0_s0";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <550000>;
>> + regulator-max-microvolt = <1050000>;
>> + regulator-ramp-delay = <2300>;
>> + vin-supply = <&vcc5v0_sys>;
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_cpu_big1_s0: regulator@43 {
>> + compatible = "rockchip,rk8603", "rockchip,rk8602";
>> + reg = <0x43>;
>> + fcs,suspend-voltage-selector = <1>;
>> + regulator-name = "vdd_cpu_big1_s0";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <550000>;
>> + regulator-max-microvolt = <1050000>;
>> + regulator-ramp-delay = <2300>;
>> + vin-supply = <&vcc5v0_sys>;
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +};
>> +
>> +&i2c2 {
>> + status = "okay";
>> +
>> + vdd_npu_s0: regulator@42 {
>> + compatible = "rockchip,rk8602";
>> + reg = <0x42>;
>> + fcs,suspend-voltage-selector = <1>;
>> + regulator-name = "vdd_npu_s0";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <550000>;
>> + regulator-max-microvolt = <950000>;
>> + regulator-ramp-delay = <2300>;
>> + vin-supply = <&vcc5v0_sys>;
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +};
>> +
>> +&i2c6 {
>> + status = "okay";
>> +
>> + hym8563: rtc@51 {
>> + compatible = "haoyu,hym8563";
>> + reg = <0x51>;
>> + #clock-cells = <0>;
>> + clock-frequency = <32768>;
>> + clock-output-names = "hym8563";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&hym8563_int>;
>> + interrupt-parent = <&gpio0>;
>> + interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
>> + wakeup-source;
>> + };
>> +};
>> +
>> +&i2c7 {
>> + pinctrl-0 = <&i2c7m0_xfer>;
>> + status = "okay";
>> +
>> + es8316: audio-codec@11 {
>> + compatible = "everest,es8316";
>> + reg = <0x11>;
>> + clocks = <&cru I2S0_8CH_MCLKOUT>;
>> + clock-names = "mclk";
>> + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
>> + assigned-clock-rates = <12288000>;
>> + #sound-dai-cells = <0>;
>> +
>> + port {
>> + es8316_p0_0: endpoint {
>> + remote-endpoint = <&i2s0_8ch_p0_0>;
>> + };
>> + };
>> + };
>> +};
>> +
>> +&i2s0_8ch {
>> + pinctrl-0 = <&i2s0_lrck
>> + &i2s0_mclk
>> + &i2s0_sclk
>> + &i2s0_sdi0
>> + &i2s0_sdo0>;
>> + status = "okay";
>> +
>> + i2s0_8ch_p0: port {
>> + i2s0_8ch_p0_0: endpoint {
>> + dai-format = "i2s";
>> + mclk-fs = <256>;
>> + remote-endpoint = <&es8316_p0_0>;
>> + };
>> + };
>> +};
>> +
>> +&mdio0 {
>> + rgmii_phy: ethernet-phy@1 {
>> + /* YT8531C/H */
>> + compatible = "ethernet-phy-ieee802.3-c22";
>> + reg = <0x1>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&yt8531_rst>;
>> + reset-assert-us = <20000>;
>> + reset-deassert-us = <100000>;
>> + reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
>> + };
>> +};
>> +
>> +/* M.2 E-Key */
>> +&pcie2x1l1 {
>> + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
>> + vpcie3v3-supply = <&vcc3v3_sys>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
>> + status = "okay";
>> +};
>> +
>> +/* ethernet */
>> +&pcie2x1l2 {
>> + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
>> + vpcie3v3-supply = <&vcc3v3_sys>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&rtl8111_isolate>;
>> + status = "okay";
>> +};
>> +
>> +&pcie30phy {
>> + status = "okay";
>> +};
>> +
>> +&pcie3x2 {
>> + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
>> + vpcie3v3-supply = <&vcc3v3_sys>;
>> + status = "okay";
>> +};
>> +
>> +/* M.2 M-Kye ssd */
>> +&pcie3x4 {
>> + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
>> + vpcie3v3-supply = <&vcc3v3_sys>;
>> + status = "okay";
>> +};
>> +
>> +&pinctrl {
>> + cam {
>> + cam_en: cam-en {
>> + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_output_high>;
>> + };
>> + };
>> +
>> + hym8563 {
>> + hym8563_int: hym8563-int {
>> + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> + };
>> +
>> + lcd {
>> + lcdpwr_en: lcdpwr-en {
>> + rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
>> + };
>> +
>> + bl_en: bl-en {
>> + rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + rtl8111 {
>> + rtl8111_isolate: rtl8111-isolate {
>> + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> + };
>> +
>> + rtl8211f {
>> + yt8531_rst: yt8531-rst {
>> + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + usb {
>> + vcc5v0_host1_en: vcc5v0-host1-en {
>> + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> + };
>> +
>> + usb-typec {
>> + typec5v_pwren: typec5v-pwren {
>> + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> + };
>> +
>> + wifi {
>> + bt_pwron: bt-pwron {
>> + rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> +
>> + pcie_clkreq: pcie-clkreq {
>> + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> +
>> + pcie_rst: pcie-rst {
>> + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> +
>> + wifi_pwron: wifi-pwron {
>> + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> +
>> + pcie_wake: pcie-wake {
>> + rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> + };
>> +};
>> +
>> +&pwm2 {
>> + status = "okay";
>> +};
>> +
>> +&saradc {
>> + vref-supply = <&vcc_1v8_s0>;
>> + status = "okay";
>> +};
>> +
>> +&sata1 {
>> + status = "okay";
>> +};
>> +
>> +&sdhci {
>> + bus-width = <8>;
>> + no-sdio;
>> + no-sd;
>> + non-removable;
>> + max-frequency = <200000000>;
>> + mmc-hs400-1_8v;
>> + mmc-hs400-enhanced-strobe;
>> + status = "okay";
>> +};
>> +
>> +&sdmmc {
>> + max-frequency = <150000000>;
>> + no-sdio;
>> + no-mmc;
>> + bus-width = <4>;
>> + cap-mmc-highspeed;
>> + cap-sd-highspeed;
>> + disable-wp;
>> + sd-uhs-sdr104;
>> + vqmmc-supply = <&vccio_sd_s0>;
>> + status = "okay";
>> +};
>> +
>> +&spi2 {
>> + status = "okay";
>> + assigned-clocks = <&cru CLK_SPI2>;
>> + assigned-clock-rates = <200000000>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
>> + num-cs = <1>;
>> +
>> + pmic@0 {
>> + compatible = "rockchip,rk806";
>> + spi-max-frequency = <1000000>;
>> + reg = <0x0>;
>> +
>> + interrupt-parent = <&gpio0>;
>> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
>> + <&rk806_dvs2_null>, <&rk806_dvs3_null>;
>> +
>> + vcc1-supply = <&vcc5v0_sys>;
>> + vcc2-supply = <&vcc5v0_sys>;
>> + vcc3-supply = <&vcc5v0_sys>;
>> + vcc4-supply = <&vcc5v0_sys>;
>> + vcc5-supply = <&vcc5v0_sys>;
>> + vcc6-supply = <&vcc5v0_sys>;
>> + vcc7-supply = <&vcc5v0_sys>;
>> + vcc8-supply = <&vcc5v0_sys>;
>> + vcc9-supply = <&vcc5v0_sys>;
>> + vcc10-supply = <&vcc5v0_sys>;
>> + vcc11-supply = <&vcc_2v0_pldo_s3>;
>> + vcc12-supply = <&vcc5v0_sys>;
>> + vcc13-supply = <&vcc_2v0_pldo_s3>;
>> + vcc14-supply = <&vcc_2v0_pldo_s3>;
>> + vcca-supply = <&vcc5v0_sys>;
>> +
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + rk806_dvs1_null: dvs1-null-pins {
>> + pins = "gpio_pwrctrl2";
>> + function = "pin_fun0";
>> + };
>> +
>> + rk806_dvs2_null: dvs2-null-pins {
>> + pins = "gpio_pwrctrl2";
>> + function = "pin_fun0";
>> + };
>> +
>> + rk806_dvs3_null: dvs3-null-pins {
>> + pins = "gpio_pwrctrl3";
>> + function = "pin_fun0";
>> + };
>> +
>> + regulators {
>> + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
>> + regulator-boot-on;
>> + regulator-min-microvolt = <550000>;
>> + regulator-max-microvolt = <950000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vdd_gpu_s0";
>> + regulator-enable-ramp-delay = <400>;
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <550000>;
>> + regulator-max-microvolt = <950000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vdd_cpu_lit_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_log_s0: dcdc-reg3 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <675000>;
>> + regulator-max-microvolt = <750000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vdd_log_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + regulator-suspend-microvolt = <750000>;
>> + };
>> + };
>> +
>> + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <550000>;
>> + regulator-max-microvolt = <950000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vdd_vdenc_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_ddr_s0: dcdc-reg5 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <675000>;
>> + regulator-max-microvolt = <900000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vdd_ddr_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + regulator-suspend-microvolt = <850000>;
>> + };
>> + };
>> +
>> + vdd2_ddr_s3: dcdc-reg6 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-name = "vdd2_ddr_s3";
>> +
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + };
>> + };
>> +
>> + vcc_2v0_pldo_s3: dcdc-reg7 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <2000000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vdd_2v0_pldo_s3";
>> +
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <2000000>;
>> + };
>> + };
>> +
>> + vcc_3v3_s3: dcdc-reg8 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-name = "vcc_3v3_s3";
>> +
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <3300000>;
>> + };
>> + };
>> +
>> + vddq_ddr_s0: dcdc-reg9 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-name = "vddq_ddr_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_1v8_s3: dcdc-reg10 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-name = "vcc_1v8_s3";
>> +
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <1800000>;
>> + };
>> + };
>> +
>> + avcc_1v8_s0: pldo-reg1 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-name = "avcc_1v8_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_1v8_s0: pldo-reg2 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-name = "vcc_1v8_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + regulator-suspend-microvolt = <1800000>;
>> + };
>> + };
>> +
>> + avdd_1v2_s0: pldo-reg3 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-name = "avdd_1v2_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_3v3_s0: pldo-reg4 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vcc_3v3_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vccio_sd_s0: pldo-reg5 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vccio_sd_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + pldo6_s3: pldo-reg6 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-name = "pldo6_s3";
>> +
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <1800000>;
>> + };
>> + };
>> +
>> + vdd_0v75_s3: nldo-reg1 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <750000>;
>> + regulator-name = "vdd_0v75_s3";
>> +
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <750000>;
>> + };
>> + };
>> +
>> + vdd_ddr_pll_s0: nldo-reg2 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <850000>;
>> + regulator-max-microvolt = <850000>;
>> + regulator-name = "vdd_ddr_pll_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + regulator-suspend-microvolt = <850000>;
>> + };
>> + };
>> +
>> + avdd_0v75_s0: nldo-reg3 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <750000>;
>> + regulator-name = "avdd_0v75_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_0v85_s0: nldo-reg4 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <850000>;
>> + regulator-max-microvolt = <850000>;
>> + regulator-name = "vdd_0v85_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_0v75_s0: nldo-reg5 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <750000>;
>> + regulator-name = "vdd_0v75_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> + };
>> + };
>> +};
>> +
>> +&tsadc {
>> + status = "okay";
>> +};
>> +
>> +&u2phy2 {
>> + status = "okay";
>> +};
>> +
>> +&u2phy3 {
>> + status = "okay";
>> +};
>> +
>> +&u2phy2_host {
>> + phy-supply = <&vcc5v0_host>;
>> + status = "okay";
>> +};
>> +
>> +&u2phy3_host {
>> + phy-supply = <&vcc5v0_host>;
>> + status = "okay";
>> +};
>> +
>> +&uart2 {
>> + pinctrl-0 = <&uart2m0_xfer>;
>> + status = "okay";
>> +};
>> +
>> +&usb_host0_ehci {
>> + status = "okay";
>> +};
>> +
>> +&usb_host0_ohci {
>> + status = "okay";
>> +};
>> +
>> +&usb_host1_ehci {
>> + status = "okay";
>> +};
>> +
>> +&usb_host1_ohci {
>> + status = "okay";
>> +};
>>
>
>
>
>
>
>_______________________________________________
>linux-arm-kernel mailing list
>linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
