Re: [PATCH] arm64: dts: xilinx: Apply overlays to base dtbs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 30, 2023 at 5:01 PM Michal Simek <michal.simek@xxxxxxx> wrote:
>
>
>
> On 11/29/23 17:13, Rob Herring wrote:
> > On Mon, Sep 18, 2023 at 5:56 AM Michal Simek <michal.simek@xxxxxxx> wrote:
> >>
> >>
> >>
> >> On 9/11/23 23:47, Rob Herring wrote:
> >>> DT overlays in tree need to be applied to a base DTB to validate they
> >>> apply, to run schema checks on them, and to catch any errors at compile
> >>> time. Defining the "-dtbs" variable is not enough as the combined DT must
> >>> be added to dtbs-y.
> >>>
> >>> zynqmp-sck-kr-g-revA.dtso and zynqmp-sck-kr-g-revB.dtso don't exist, so drop
> >>> them.
> >>>
> >>> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> >>> ---
> >>>    arch/arm64/boot/dts/xilinx/Makefile | 9 ++++-----
> >>>    1 file changed, 4 insertions(+), 5 deletions(-)
> >>>
> >>> diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
> >>> index 5e40c0b4fa0a..1068b0fa8e98 100644
> >>> --- a/arch/arm64/boot/dts/xilinx/Makefile
> >>> +++ b/arch/arm64/boot/dts/xilinx/Makefile
> >>> @@ -22,11 +22,10 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA.dtb
> >>>    dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA.dtb
> >>>
> >>>    zynqmp-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
> >>> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revA.dtb
> >>>    zynqmp-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
> >>> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revB.dtb
> >>>    zynqmp-smk-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
> >>> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revA.dtb
> >>>    zynqmp-smk-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
> >>> -
> >>> -zynqmp-sm-k26-revA-sck-kr-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
> >>> -zynqmp-sm-k26-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
> >>> -zynqmp-smk-k26-revA-sck-kr-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
> >>> -zynqmp-smk-k26-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
> >>> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revB.dtb
> >>
> >> Applied.
> >
> > Why is this in next still, but not in Linus' tree?
>
> I was OOO and didn't send pull request to Arnd. I will do it for 6.8. It means
> in 2-3 weeks from now.
>
> Thanks,
> Michal
>


This is a regression by 45fe0dc4ea2e.



Fixes: 45fe0dc4ea2e ("arm64: xilinx: Use zynqmp prefix for SOM dt overlays")


is suitable.






-- 
Best Regards
Masahiro Yamada





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux