On 23-12-12 11:39:52, Abel Vesa wrote:
> Add nodes for SMB2360 in separate dtsi file.
> Also add the eUSB2 repeater nodes.
>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
On a second thought, please ignore this one.
This depends on the SPMI multi master work.
Will send proper version later on.
> arch/arm64/boot/dts/qcom/smb2360.dtsi | 51 +++++++++++++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/smb2360.dtsi b/arch/arm64/boot/dts/qcom/smb2360.dtsi
> new file mode 100644
> index 000000000000..782746a20403
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/smb2360.dtsi
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/spmi/spmi.h>
> +
> +/ {
> +};
> +
> +&spmi1_bus {
> + smb2360h: pmic@7 {
> + compatible = "qcom,sm2360", "qcom,spmi-pmic";
> + reg = <0x7 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + smb2360_1_eusb2_repeater: phy@fd00 {
> + compatible = "qcom,smb2360-eusb2-repeater";
> + reg = <0xfd00>;
> + #phy-cells = <0>;
> + };
> + };
> +
> + smb2360k: pmic@a {
> + compatible = "qcom,sm2360", "qcom,spmi-pmic";
> + reg = <0xa SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + smb2360_2_eusb2_repeater: phy@fd00 {
> + compatible = "qcom,smb2360-eusb2-repeater";
> + reg = <0xfd00>;
> + #phy-cells = <0>;
> + };
> + };
> +
> + smb2360l: pmic@b {
> + compatible = "qcom,sm2360", "qcom,spmi-pmic";
> + reg = <0xb SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + smb2360_3_eusb2_repeater: phy@fd00 {
> + compatible = "qcom,smb2360-eusb2-repeater";
> + reg = <0xfd00>;
> + #phy-cells = <0>;
> + };
> + };
> +};
>
> ---
> base-commit: bbd220ce4e29ed55ab079007cff0b550895258eb
> change-id: 20231201-x1e80100-dts-smb2360-0c7c25f2e0a7
>
> Best regards,
> --
> Abel Vesa <abel.vesa@xxxxxxxxxx>
>
