On 12/11/23 22:10, Rob Herring wrote:
On Tue, Dec 5, 2023 at 12:11 AM Sibi Sankar <quic_sibis@xxxxxxxxxxx> wrote:
From: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
Add support for the global clock controller found on X1E80100
based devices.
Co-developed-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
Signed-off-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
Co-developed-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
v3:
* Rename gcc config to CLK_X1E80100_GCC [Krzysztof/Abel/Bryan]
* Pickup Rbs.
drivers/clk/qcom/Kconfig | 10 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-x1e80100.c | 6807 +++++++++++++++++++++++++++++++
3 files changed, 6818 insertions(+)
create mode 100644 drivers/clk/qcom/gcc-x1e80100.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index ad1acd9b7426..a9bb50da4de5 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -20,6 +20,16 @@ menuconfig COMMON_CLK_QCOM
if COMMON_CLK_QCOM
+config CLK_X1E80100_GCC
+ tristate "X1E80100 Global Clock Controller"
+ depends on ARM64 || COMPILE_TEST
+ select QCOM_GDSC
+ help
+ Support for the global clock controller on Qualcomm Technologies, Inc
+ X1E80100 devices.
+ Say Y if you want to use peripheral devices such as UART, SPI, I2C,
+ USB, UFS, SD/eMMC, PCIe, etc.
+
config QCOM_A53PLL
tristate "MSM8916 A53 PLL"
help
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 17edd73f9839..a8498ee3595e 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -21,6 +21,7 @@ clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
obj-$(CONFIG_CLK_GFM_LPASS_SM8250) += lpass-gfm-sm8250.o
+obj-$(CONFIG_CLK_X1E80100_GCC) += gcc-x1e80100.o
obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o
obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
diff --git a/drivers/clk/qcom/gcc-x1e80100.c b/drivers/clk/qcom/gcc-x1e80100.c
new file mode 100644
index 000000000000..74db7fef237b
--- /dev/null
+++ b/drivers/clk/qcom/gcc-x1e80100.c
@@ -0,0 +1,6807 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
Probably not a header you need as reported for linux-next. You need
platform_device.h and either of.h or mod_devicetable.h.
Thanks, Stephen already sent out a fix for the same.
Rob
--
2.17.1
