Add led-fan-fault gpio pin on the PCA9555 on the i2c bus 0.
Signed-off-by: Yang Chen <yangchen.openbmc@xxxxxxxxx>
---
.../dts/aspeed/aspeed-bmc-facebook-minerva.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
index c7445c819baf..090fe2f6b1d8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -39,6 +39,16 @@ iio-hwmon {
<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
<&adc1 2>;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-fan-fault {
+ label = "led-fan-fault";
+ gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
};
&uart6 {
@@ -118,6 +128,13 @@ power-monitor@68 {
compatible = "adi,ltc2945";
reg = <0x68>;
};
+
+ leds_gpio: gpio@19 {
+ compatible = "nxp,pca9555";
+ reg = <0x19>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
&i2c1 {
--
2.34.1
