On 08/12/2023 16:48, Chris Morgan wrote:
From: Chris Morgan <macromorgan@xxxxxxxxxxx>
The AVCL register, according to the datasheet, comes in increments
of -0.2v between -4.4v (represented by 0x0) to -5.0v (represented
by 0x3). The current calculation is done by adding the defined
AVCL value in mV to -4400 and then dividing by 200 to get the register
value. Unfortunately if I subtract -4400 from -4400 I get -8800, which
divided by 200 gives me -44. If I instead subtract -4400 from -4400
I get 0, which divided by 200 gives me 0. Based on the datasheet this
is the expected register value.
Fixes: 83b7a8e7e88e ("drm/panel/panel-sitronix-st7701: Parametrize voltage and timing")
Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
---
drivers/gpu/drm/panel/panel-sitronix-st7701.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7701.c b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
index 0459965e1b4f..036ac403ed21 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7701.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
@@ -288,7 +288,7 @@ static void st7701_init_sequence(struct st7701 *st7701)
FIELD_PREP(DSI_CMD2_BK1_PWRCTRL2_AVDD_MASK,
DIV_ROUND_CLOSEST(desc->avdd_mv - 6200, 200)) |
FIELD_PREP(DSI_CMD2_BK1_PWRCTRL2_AVCL_MASK,
- DIV_ROUND_CLOSEST(-4400 + desc->avcl_mv, 200)));
+ DIV_ROUND_CLOSEST(-4400 - desc->avcl_mv, 200)));
/* T2D = 0.2us * T2D[3:0] */
ST7701_DSI(st7701, DSI_CMD2_BK1_SPD1,
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>