The wpss-pil driver wants to manage too many resources that cannot be
touched with standard Qualcomm firmware.
Use the compatible from the PAS driver and move the ChromeOS-specific
bits to sc7280-chrome-common.dtsi.
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 19 ++++++++++++++++++-
arch/arm64/boot/dts/qcom/sc7280.dtsi | 15 +++------------
2 files changed, 21 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index fd3ff576d1fc..8f7682fe254a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -92,8 +92,25 @@ spi_flash: flash@0 {
};
&remoteproc_wpss {
- status = "okay";
+ compatible = "qcom,sc7280-wpss-pil";
+ clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+ <&gcc GCC_WPSS_AHB_CLK>,
+ <&gcc GCC_WPSS_RSCP_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ahb_bdg",
+ "ahb",
+ "rscp",
+ "xo";
+
+ resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+ <&pdc_reset PDC_WPSS_SYNC_RESET>;
+ reset-names = "restart", "pdc_sync";
+
+ qcom,halt-regs = <&tcsr_1 0x17000>;
+
firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
+
+ status = "okay";
};
&scm {
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 221ab163c8ad..f404276361fa 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3601,7 +3601,7 @@ qspi: spi@88dc000 {
};
remoteproc_wpss: remoteproc@8a00000 {
- compatible = "qcom,sc7280-wpss-pil";
+ compatible = "qcom,sc7280-wpss-pas";
reg = <0 0x08a00000 0 0x10000>;
interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
@@ -3613,12 +3613,8 @@ remoteproc_wpss: remoteproc@8a00000 {
interrupt-names = "wdog", "fatal", "ready", "handover",
"stop-ack", "shutdown-ack";
- clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
- <&gcc GCC_WPSS_AHB_CLK>,
- <&gcc GCC_WPSS_RSCP_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "ahb_bdg", "ahb",
- "rscp", "xo";
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
power-domains = <&rpmhpd SC7280_CX>,
<&rpmhpd SC7280_MX>;
@@ -3631,11 +3627,6 @@ remoteproc_wpss: remoteproc@8a00000 {
qcom,smem-states = <&wpss_smp2p_out 0>;
qcom,smem-state-names = "stop";
- resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
- <&pdc_reset PDC_WPSS_SYNC_RESET>;
- reset-names = "restart", "pdc_sync";
-
- qcom,halt-regs = <&tcsr_1 0x17000>;
status = "disabled";
--
2.43.0
