[PATCH v4 07/17] drm/rockchip: vop2: set bg dly and prescan dly at vop2_post_config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Andy Yan <andy.yan@xxxxxxxxxxxxxx>

We need to setup background delay cycle and prescan
delay cycle when a mode is enable to avoid trigger
POST_BUF_EMPTY irq on rk3588.

Note: RK356x has no such requirement.

Signed-off-by: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
---

(no changes since v1)

 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 26 ++++++++------------
 1 file changed, 10 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
index 40b5c5ca4864..d52395b6aff7 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
@@ -1460,8 +1460,18 @@ static void vop2_post_config(struct drm_crtc *crtc)
 	u32 top_margin = 100, bottom_margin = 100;
 	u16 hsize = hdisplay * (left_margin + right_margin) / 200;
 	u16 vsize = vdisplay * (top_margin + bottom_margin) / 200;
+	u16 hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
 	u16 hact_end, vact_end;
 	u32 val;
+	u32 bg_dly;
+	u32 pre_scan_dly;
+
+	bg_dly = vp->data->pre_scan_max_dly[3];
+	vop2_writel(vp->vop2, RK3568_VP_BG_MIX_CTRL(vp->id),
+		    FIELD_PREP(RK3568_VP_BG_MIX_CTRL__BG_DLY, bg_dly));
+
+	pre_scan_dly = ((bg_dly + (hdisplay >> 1) - 1) << 16) | hsync_len;
+	vop2_vp_write(vp, RK3568_VP_PRE_SCAN_HTIMING, pre_scan_dly);
 
 	vsize = rounddown(vsize, 2);
 	hsize = rounddown(hsize, 2);
@@ -1956,11 +1966,6 @@ static void vop2_setup_layer_mixer(struct vop2_video_port *vp)
 	u32 layer_sel = 0;
 	u32 port_sel;
 	unsigned int nlayer, ofs;
-	struct drm_display_mode *adjusted_mode;
-	u16 hsync_len;
-	u16 hdisplay;
-	u32 bg_dly;
-	u32 pre_scan_dly;
 	u32 ovl_ctrl;
 	int i;
 	struct vop2_video_port *vp0 = &vop2->vps[0];
@@ -1968,17 +1973,6 @@ static void vop2_setup_layer_mixer(struct vop2_video_port *vp)
 	struct vop2_video_port *vp2 = &vop2->vps[2];
 	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(vp->crtc.state);
 
-	adjusted_mode = &vp->crtc.state->adjusted_mode;
-	hsync_len = adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start;
-	hdisplay = adjusted_mode->crtc_hdisplay;
-
-	bg_dly = vp->data->pre_scan_max_dly[3];
-	vop2_writel(vop2, RK3568_VP_BG_MIX_CTRL(vp->id),
-		    FIELD_PREP(RK3568_VP_BG_MIX_CTRL__BG_DLY, bg_dly));
-
-	pre_scan_dly = ((bg_dly + (hdisplay >> 1) - 1) << 16) | hsync_len;
-	vop2_vp_write(vp, RK3568_VP_PRE_SCAN_HTIMING, pre_scan_dly);
-
 	ovl_ctrl = vop2_readl(vop2, RK3568_OVL_CTRL);
 	ovl_ctrl |= RK3568_OVL_CTRL__LAYERSEL_REGDONE_IMD;
 	if (vcstate->yuv_overlay)
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux