On Wed, Dec 06, 2023 at 01:11:34PM +0000, Lee Jones wrote: > On Wed, 06 Dec 2023, Dmitry Rokosov wrote: > > > Hello Lee, > > > > On Fri, Dec 01, 2023 at 11:09:46AM +0000, Lee Jones wrote: > > > On Sat, 25 Nov 2023 23:05:08 +0300, Dmitry Rokosov wrote: > > > > The following patch series includes several updates for the AW200XX LED > > > > driver: > > > > - some small fixes and optimizations to the driver implementation: > > > > delays, autodimming calculation, disable_locking regmap flag, > > > > display_rows calculation in runtime; > > > > - fix LED device tree node pattern to accept LED names counting not > > > > only from 0 to f; > > > > - add missing reg constraints; > > > > - support HWEN hardware control, which allows enabling or disabling > > > > AW200XX RTL logic from the main SoC using a GPIO pin; > > > > - introduce the new AW20108 LED controller, the datasheet for this > > > > controller can be found at [1]. > > > > > > > > [...] > > > > > > Applied, thanks! > > > > > > [01/11] leds: aw200xx: fix write to DIM parameter > > > commit: 785fec3a8daff2957fd55e49cbdfe0a50866fdb7 > > > [02/11] leds: aw200xx: support HWEN hardware control > > > commit: eabe8239022cf3c75b90d9ee07dcfbbe4e50bcac > > > [03/11] dt-bindings: leds: aw200xx: introduce optional enable-gpios property > > > commit: e91899ea3759d04e185721153a036e1a25e315b7 > > > [04/11] leds: aw200xx: calculate dts property display_rows in the driver > > > commit: 4ccd392c3ea7ceefbee58622e634d4997ef46acc > > > [05/11] dt-bindings: leds: aw200xx: remove property "awinic,display-rows" > > > commit: 66d078f105837670c52bb31da29e26ad13bc2923 > > > [06/11] leds: aw200xx: add delay after software reset > > > commit: aac13e5630d6e081a9f6c5a57e5e6fc1152acca8 > > > [07/11] leds: aw200xx: enable disable_locking flag in regmap config > > > commit: 851fa70b9b162bbf5b5f5f92fc450633e6b21a3a > > > [08/11] leds: aw200xx: improve autodim calculation method > > > commit: 5fcc24b92b43f012cbf430244f0698ff588ec9fc > > > [09/11] leds: aw200xx: add support for aw20108 device > > > commit: abc74724d5e714bb3359124f3576d5318828a83e > > > [10/11] dt-bindings: leds: awinic,aw200xx: add AW20108 device > > > commit: d6bbe677add2c560ae4aa2f9dab7a19c287e2193 > > > [11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints > > > commit: 5707a06e5391a4eeaf0c2705f973336537a41c79 > > > > Thank you for applying the patch series! > > > > Could you please advise where I can find the above commits? I've tried > > looking in the 'lee/leds' branch, but I couldn't find anything. I want > > They there now and should be in -next by tomorrow. > Thank you, got it! > > to cherry-pick the commits that you applied to my internal branch, which > > I sync with the upstream periodically. > > I suggest that a rebase might be a better approach. Of course, you are absolutely correct! We regularly perform rebases on our mainline mirror. However, the patches that we are preparing for the upstream are managed through our internal Gerrit system. When the maintainer merges these patches into their tree, we also merge them on the Gerrit side. Therefore, I would like to inquire about the current status of these patches. -- Thank you, Dmitry
