Re: [PATCH 4/9] PCI: imx6: Using "linux,pci-domain" as slot ID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 06, 2023 at 11:50:16AM -0500, Frank Li wrote:
> On Wed, Dec 06, 2023 at 10:36:56AM -0600, Bjorn Helgaas wrote:
> > In subject, maybe you mean "Use 'linux,pci-domain' as slot ID"?
> > "Using" is the wrong verb form here.
> > 
> > On Wed, Dec 06, 2023 at 10:58:58AM -0500, Frank Li wrote:
> > > Avoid use get slot id by compared with register physical address. If there
> > > are more than 2 slots, compared logic will become complex.
> > 
> > But this doesn't say anything about "linux,pci-domain", and I don't
> > see anything about a register physical address in the patch.
> > 
> > Maybe this commit log was meant for a different patch?  I'm confused.
> > 
> > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > > ---
> > >  drivers/pci/controller/dwc/pci-imx6.c | 6 ++++++
> > >  1 file changed, 6 insertions(+)
> > > 
> > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> > > index 62d77fabd82a..239ef439ba70 100644
> > > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > > @@ -33,6 +33,7 @@
> > >  #include <linux/pm_domain.h>
> > >  #include <linux/pm_runtime.h>
> > >  
> > > +#include "../../pci.h"
> > >  #include "pcie-designware.h"
> > >  
> > >  #define IMX8MQ_GPR_PCIE_REF_USE_PAD		BIT(9)
> > > @@ -1333,6 +1334,11 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> > >  					     "Failed to get PCIEPHY reset control\n");
> > >  	}
> > >  
> > > +	/* Using linux,pci-domain as PCI slot id */
> > > +	imx6_pcie->controller_id = of_get_pci_domain_nr(node);
> > > +	if (imx6_pcie->controller_id)
> > > +		imx6_pcie->controller_id = 0;
> > 
> > I don't understand what this is doing.  It looks the same as just:
> 
> Good capture. It should be 
> if (imx6_pcie->controller_id < 0)
> 	imx6_pcie->controller_id = 0;
> 
> for only one PCI controller case. I just tested first one slot before send
> patch, so not met problem.
> 
> Previously, we use below logic
> 	if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
> 		imx6_pcie->controller_id = 1;
> 
> It is not good to depend on register's base address. If there are 3
> controllers, check logic will becomoe ugly.

Makes sense.  If the previous code depended on the base address, this
patch would make more sense if it contained both the addition of the
of_get_pci_domain_nr() call and the removal of the base address code.

> > Maybe this is a typo?  As written, it doesn't look like there's any
> > point in calling of_get_pci_domain_nr().
> > 
> > >  	switch (imx6_pcie->drvdata->variant) {
> > >  	case IMX7D:
> > >  		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
> > > -- 
> > > 2.34.1
> > > 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux