On Thu, Nov 30, 2023 at 05:16:02PM +0100, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
>
> The Kontron Electronics DL i.MX8MM consists of the BL i.MX8MM board
> and a 7" LVDS panel. Provide an overlay that enables the panel.
>
> Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> ---
> Changes for v2:
> * Rework DSI mux GPIO logic to be compatible with overlay
> ---
> arch/arm64/boot/dts/freescale/Makefile | 4 +
> .../boot/dts/freescale/imx8mm-kontron-dl.dtso | 200 ++++++++++++++++++
> 2 files changed, 204 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 300049037eb0b..e08024797721a 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -166,6 +166,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
>
> +imx8mm-kontron-dl-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
> +
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-dl.dtb
> +
> imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
> imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
> imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
> new file mode 100644
> index 0000000000000..c6369072577e0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
> @@ -0,0 +1,200 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2023 Kontron Electronics GmbH
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include "imx8mm-pinfunc.h"
> +
> +&{/} {
> + compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 50000 0>;
> + brightness-levels = <0 100>;
> + num-interpolated-steps = <100>;
> + default-brightness-level = <100>;
> + };
> +
> + panel {
> + compatible = "panel-lvds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_panel>;
> + backlight = <&backlight>;
> + data-mapping = "vesa-24";
> + enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
> + height-mm = <86>;
> + width-mm = <154>;
> +
> + panel-timing {
> + clock-frequency = <51200000>;
> + hactive = <1024>;
> + vactive = <600>;
> + hsync-len = <1>;
> + hfront-porch = <160>;
> + hback-porch = <160>;
> + vsync-len = <1>;
> + vfront-porch = <12>;
> + vback-porch = <23>;
> + };
> +
> + port {
> + panel_out_bridge: endpoint {
> + remote-endpoint = <&bridge_out_panel>;
> + };
> + };
> + };
> +};
> +
> +&dsi_mux_sel_hdmi {
> + status = "disabled";
> +};
> +
> +&dsi_mux_sel_lvds {
> + status = "okay";
> +};
> +
> +&dsi_out_bridge {
> + remote-endpoint = <&bridge_in_dsi_lvds>;
> +};
> +
> +&gpio3 {
> + panel_rst {
> + gpio-hog;
> + gpios = <20 GPIO_ACTIVE_HIGH>;
> + output-high;
> + line-name = "panel-reset";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_panel_rst>;
> + };
> +
> + panel_stby {
> + gpio-hog;
> + gpios = <21 GPIO_ACTIVE_HIGH>;
> + output-high;
> + line-name = "panel-standby";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_panel_stby>;
> + };
> +
> + panel_hinv {
> + gpio-hog;
> + gpios = <24 GPIO_ACTIVE_HIGH>;
> + output-high;
> + line-name = "panel-horizontal-invert";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_panel_hinv>;
> + };
> +
> + panel_vinv {
> + gpio-hog;
> + gpios = <25 GPIO_ACTIVE_HIGH>;
> + output-low;
> + line-name = "panel-vertical-invert";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_panel_vinv>;
> + };
> +};
> +
> +&hdmi {
> + status = "disabled";
> +};
> +
> +&i2c2 {
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gt911@5d {
> + compatible = "goodix,gt928";
> + reg = <0x5d>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_touch>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <22 8>;
> + reset-gpios = <&gpio3 23 0>;
> + irq-gpios = <&gpio3 22 0>;
> + };
> +};
> +
> +&lvds {
> + status = "okay";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@2 {
> + reg = <2>;
Have a newline between properties and child node.
> + bridge_out_panel: endpoint {
> + remote-endpoint = <&panel_out_bridge>;
> + };
> + };
> + };
> +};
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_panel_rst: panelrstgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19
> + >;
> + };
> +
> + pinctrl_panel_stby: panelstbygrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19
> + >;
> + };
> +
> + pinctrl_panel_hinv: panelhinvgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x19
> + >;
> + };
> +
> + pinctrl_panel_vinv: panelvinvgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
Could you sort the pinctrl nodes alphabetically?
Shawn
> + fsl,pins = <
> + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000083
> + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000083
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x6
> + >;
> + };
> +
> + pinctrl_panel: panelgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x19
> + >;
> + };
> +
> + pinctrl_touch: touchgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19
> + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19
> + >;
> + };
> +};
> --
> 2.43.0
>
