Add bindings for the MediaTek PEXTP Ethernet SerDes PHY found in the MediaTek MT7988 SoC which can operate at various interfaces modes: * USXGMII * 10GBase-R * 5GBase-R * 2500Base-X * 1000Base-X * Cisco SGMII (MAC side) Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx> --- .../bindings/phy/mediatek,xfi-pextp.yaml | 80 +++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/mediatek,xfi-pextp.yaml diff --git a/Documentation/devicetree/bindings/phy/mediatek,xfi-pextp.yaml b/Documentation/devicetree/bindings/phy/mediatek,xfi-pextp.yaml new file mode 100644 index 0000000000000..58c93368141e2 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,xfi-pextp.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,xfi-pextp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek XFI PEXTP SerDes PHY + +maintainers: + - Daniel Golle <daniel@xxxxxxxxxxxxxx> + +description: + The MediaTek XFI PEXTP SerDes PHY provides the physical SerDes lanes + used by the MediaTek USXGMII PCS. + +properties: + $nodename: + pattern: "^phy@[0-9a-f]+$" + + compatible: + const: mediatek,mt7988-xfi-pextp + + reg: + maxItems: 1 + + clocks: + items: + - description: XFI PHY clock + - description: XFI register clock + + clock-names: + items: + - const: "xfipll" + - const: "topxtal" + + resets: + items: + - description: PEXTP reset + + mediatek,usxgmii-performance-errata: + $ref: /schemas/types.yaml#/definitions/flag + description: + USXGMII0 on MT7988 suffers from a performance problem in 10GBase-R + mode which needs a work-around in the driver. The work-around is + enabled using this flag. + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mediatek,mt7988-clk.h> + #include <dt-bindings/reset/mediatek,mt7988-resets.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + phy@11f20000 { + compatible = "mediatek,mt7988-xfi-pextp"; + reg = <0 0x11f20000 0 0x10000>; + clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>, + <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>; + clock-names = "xfipll", "topxtal"; + resets = <&watchdog MT7988_TOPRGU_XFI_PEXTP0_GRST>; + mediatek,usxgmii-performance-errata; + #phy-cells = <0>; + }; + }; + +... -- 2.43.0
