[RESEND PATCH] arm64: dts: rockchip: Add PCIe pinctrls to Turing RK1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The RK3588 PCIe 3.0 controller seems to have unpredictable behavior when
no CLKREQ/PERST/WAKE pins are configured in the pinmux. In particular, it
will sometimes (varying between specific RK3588 chips, not over time) shut
off the DBI block, and reads to this range will instead stall
indefinitely.

When this happens, it will prevent Linux from booting altogether. The
PCIe driver will stall the CPU core once it attempts to read the version
information from the DBI range.

Fix this boot hang by adding the correct pinctrl configuration to the
PCIe 3.0 device node, which is the proper thing to do anyway. While
we're at it, also add the necessary configuration to the PCIe 2.0 node,
which may or may not fix the equivalent problem over there -- but is the
proper thing to do anyway. :)

Fixes: 2806a69f3fef6 ("arm64: dts: rockchip: Add Turing RK1 SoM support")
Signed-off-by: Sam Edwards <CFSworks@xxxxxxxxx>
---
 .../arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
index 9570b34aca2e..129f14dbd42f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
@@ -214,7 +214,7 @@ rgmii_phy: ethernet-phy@1 {
 &pcie2x1l1 {
 	linux,pci-domain = <1>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pcie2_reset>;
+	pinctrl-0 = <&pcie30x1m1_pins>;
 	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -226,7 +226,7 @@ &pcie30phy {
 &pcie3x4 {
 	linux,pci-domain = <0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pcie3_reset>;
+	pinctrl-0 = <&pcie30x4m1_pins>;
 	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc3v3_pcie30>;
 	status = "okay";
@@ -245,17 +245,7 @@ hym8563_int: hym8563-int {
 		};
 	};
 
-	pcie2 {
-		pcie2_reset: pcie2-reset {
-			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
 	pcie3 {
-		pcie3_reset: pcie3-reset {
-			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
 		vcc3v3_pcie30_en: pcie3-reg {
 			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
-- 
2.41.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux