On Tue, 05 Dec 2023 15:42:20 +0200, Dumitru Ceclan wrote: > The AD7173 family offer a complete integrated Sigma-Delta ADC solution > which can be used in high precision, low noise single channel applications > or higher speed multiplexed applications. The Sigma-Delta ADC is intended > primarily for measurement of signals close to DC but also delivers > outstanding performance with input bandwidths out to ~10kHz. > > Signed-off-by: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx> > --- > .../bindings/iio/adc/adi,ad7173.yaml | 170 ++++++++++++++++++ > 1 file changed, 170 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml: properties:required: ['compatible', 'reg', 'interrupts'] is not of type 'object', 'boolean' from schema $id: http://json-schema.org/draft-07/schema# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml: properties: 'required' should not be valid under {'$ref': '#/definitions/json-schema-prop-names'} hint: A json-schema keyword was found instead of a DT property name. from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml: properties:required: ['compatible', 'reg', 'interrupts'] is not of type 'object', 'boolean' from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231205134223.17335-1-mitrutzceclan@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
