Please add at least a small real commit message
Am Donnerstag, 15. Januar 2015, 11:40:58 schrieb FUKAUMI Naoki:
> Signed-off-by: FUKAUMI Naoki <naobsd@xxxxxxxxx>
> ---
> arch/arm/boot/dts/Makefile | 4 +-
> arch/arm/boot/dts/rk3288-firefly-beta.dts | 70 +++++
> arch/arm/boot/dts/rk3288-firefly.dts | 70 +++++
> arch/arm/boot/dts/rk3288-firefly.dtsi | 498
> ++++++++++++++++++++++++++++++ 4 files changed, 641 insertions(+), 1
> deletion(-)
> create mode 100644 arch/arm/boot/dts/rk3288-firefly-beta.dts
> create mode 100644 arch/arm/boot/dts/rk3288-firefly.dts
> create mode 100644 arch/arm/boot/dts/rk3288-firefly.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index cb686e6..fb03a2b 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -447,7 +447,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3066a-marsboard.dtb \
> rk3188-radxarock.dtb \
> rk3288-evb-act8846.dtb \
> - rk3288-evb-rk808.dtb
> + rk3288-evb-rk808.dtb \
> + rk3288-firefly-beta.dtb \
> + rk3288-firefly.dtb
> dtb-$(CONFIG_ARCH_S3C24XX) += \
> s3c2416-smdk2416.dtb
> dtb-$(CONFIG_ARCH_S3C64XX) += \
> diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts
> b/arch/arm/boot/dts/rk3288-firefly-beta.dts new file mode 100644
> index 0000000..d640569
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@xxxxxxxxx>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "rk3288-firefly.dtsi"
> +
> +/ {
> + model = "Firefly-RK3288 Beta";
> +};
> +
> +&ir {
> + gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
> +};
> +
> +&pwm0 {
> + status = "okay";
> +};
> +
> +&pinctrl {
> + ir {
> + ir_int: ir-int {
> + rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + act8846 {
> + pmic_vsel: pmic-vsel {
> + rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
> + };
> + };
> +};
please order nodes a bit more.
Nodes having an address (foo@ff908000 etc) should of course be ordered by this
memory address or their i2c address.
Nodes without address element should be ordered alphabetically, so here,
act8846 before ir. Same with &pinctrl before &pwm (= phandles should also be
sorted).
> diff --git a/arch/arm/boot/dts/rk3288-firefly.dts
> b/arch/arm/boot/dts/rk3288-firefly.dts new file mode 100644
> index 0000000..0bdc37c
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3288-firefly.dts
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@xxxxxxxxx>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "rk3288-firefly.dtsi"
> +
> +/ {
> + model = "Firefly-RK3288";
> +};
> +
> +&ir {
> + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> +
> +&pinctrl {
> + ir {
> + ir_int: ir-int {
> + rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + act8846 {
> + pmic_vsel: pmic-vsel {
> + rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>;
> + };
> + };
> +};
again ordering
> diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi
> b/arch/arm/boot/dts/rk3288-firefly.dtsi new file mode 100644
> index 0000000..5996778
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
> @@ -0,0 +1,498 @@
> +/*
> + * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@xxxxxxxxx>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "rk3288.dtsi"
> +
> +/ {
> + compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
> +
> + memory {
> + reg = <0 0x80000000>;
> + };
> +
> + ext_gmac: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "ext_gmac";
> + #clock-cells = <0>;
> + };
> +
> + ir: ir-receiver {
> + compatible = "gpio-ir-receiver";
> + pinctrl-names = "default";
> + pinctrl-0 = <&ir_int>;
> + };
> +
> + keys: gpio-keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + button@0 {
> + gpio-key,wakeup = <1>;
> + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
> + label = "GPIO Power";
> + linux,code = <116>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwr_key>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + work {
> + gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
> + label = "firefly:blue:user";
> + linux,default-trigger = "rc-feedback";
> + pinctrl-names = "default";
> + pinctrl-0 = <&work_led>;
> + };
> +
> + power {
> + gpios = <&gpio8 2 GPIO_ACTIVE_LOW>;
> + label = "firefly:green:power";
> + linux,default-trigger = "default-on";
> + pinctrl-names = "default";
> + pinctrl-0 = <&power_led>;
> + };
> + };
> +
> + vcc_sys: vsys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vcc_sd: sdmmc-regulator {
> + compatible = "regulator-fixed";
> + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_pwr>;
> + regulator-name = "vcc_sd";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + startup-delay-us = <100000>;
> + vin-supply = <&vcc_io>;
> + };
> +
> + vcc_flash: flash-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_flash";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&vcc_io>;
> + };
> +
> + vcc_5v: usb-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_5v";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vcc_host_5v: usb-host-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&host_vbus_drv>;
> + regulator-name = "vcc_host_5v";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + vin-supply = <&vcc_5v>;
> + };
> +
> + vcc_otg_5v: usb-otg-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&otg_vbus_drv>;
> + regulator-name = "vcc_otg_5v";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + vin-supply = <&vcc_5v>;
> + };
> +};
> +
> +&cpu0 {
> + cpu0-supply = <&vdd_cpu>;
> +};
> +
from here on downwards, ordering issues
> +&sdmmc {
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + card-detect-delay = <200>;
> + disable-wp;
> + num-slots = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
> + status = "okay";
> + vmmc-supply = <&vcc_sd>;
> + vqmmc-supply = <&vccio_sd>;
> +};
> +
> +&sdio0 {
> + broken-cd;
> + bus-width = <4>;
> + disable-wp;
> + non-removable;
> + num-slots = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
> + status = "okay";
> + vmmc-supply = <&vcc_18>;
> +};
> +
> +&emmc {
> + broken-cd;
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + disable-wp;
> + non-removable;
> + num-slots = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
> + status = "okay";
> + vmmc-supply = <&vcc_io>;
> + vqmmc-supply = <&vcc_flash>;
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&vcc_18>;
> +};
> +
> +&spi0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>;
> + status = "okay";
> +};
> +
> +&spi2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi2_clk>, <&spi2_cs0>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + status = "okay";
> +};
> +
> +&i2c5 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&tsadc {
> + rockchip,hw-tshut-mode = <0>;
> + /* status = "okay"; */
please don't add disabled or commented-out elements. In this case you want to
keep the tsadc disabled, so the whole &tsadc nodes should not be present
> +};
> +
> +&gmac {
> + assigned-clocks = <&cru SCLK_MAC>;
> + assigned-clock-parents = <&ext_gmac>;
> + clock_in_out = "input";
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
> + phy_regulator = "vcc_lan";
> + phy-mode = "rgmii";
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 1000000>;
> + snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
> + tx_delay = <0x30>;
> + rx_delay = <0x10>;
> + status = "ok";
> +};
> +
> +&usb_host1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&usbhub_rst>;
> + status = "okay";
> +};
> +
> +&usb_otg {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + vdd_cpu: syr827@40 {
> + compatible = "silergy,syr827";
> + fcs,suspend-voltage-selector = <1>;
> + reg = <0x40>;
> + regulator-name = "vdd_cpu";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vdd_gpu: syr828@41 {
> + compatible = "silergy,syr828";
> + fcs,suspend-voltage-selector = <1>;
> + reg = <0x41>;
> + regulator-name = "vdd_gpu";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + hym8563: hym8563@51 {
> + compatible = "haoyu,hym8563";
> + reg = <0x51>;
> + interrupt-parent = <&gpio7>;
> + interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rtc_int>;
> + #clock-cells = <0>;
> + clock-output-names = "xin32k";
> + };
> +
> + act8846: act8846@5a {
> + compatible = "active-semi,act8846";
> + reg = <0x5a>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
> + system-power-controller;
> +
> + regulators {
> + vcc_ddr: REG1 {
> + regulator-name = "vcc_ddr";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + vcc_io: REG2 {
> + regulator-name = "vcc_io";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vdd_log: REG3 {
> + regulator-name = "vdd_log";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + };
> +
> + vcc_20: REG4 {
> + regulator-name = "vcc_20";
> + regulator-min-microvolt = <2000000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-always-on;
> + };
> +
> + vccio_sd: REG5 {
> + regulator-name = "vccio_sd";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vdd10_lcd: REG6 {
> + regulator-name = "vdd10_lcd";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + vcca_18: REG7 {
> + regulator-name = "vcca_18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vcca_33: REG8 {
> + regulator-name = "vcca_33";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vcc_lan: REG9 {
> + regulator-name = "vcc_lan";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vdd_10: REG10 {
> + regulator-name = "vdd_10";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + vcc_18: REG11 {
> + regulator-name = "vcc_18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + vcc18_lcd: REG12 {
> + regulator-name = "vcc18_lcd";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + };
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&wdt {
> + status = "okay";
> +};
> +
> +&pinctrl {
> + pcfg_output_high: pcfg-output-high {
> + output-high;
> + };
> +
> + pcfg_output_low: pcfg-output-low {
> + output-low;
> + };
> +
> + keys {
> + pwr_key: pwr-key {
> + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + leds {
> + work_led: work-led {
> + rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + power_led: power-led {
> + rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + sdmmc {
> + sdmmc_pwr: sdmmc-pwr {
> + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + gmac {
> + phy_rst: phy-rst {
> + rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
> + };
> +
> + phy_pmeb: phy-pmeb {
> + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> +
> + phy_int: phy-int {
> + rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> +
> + };
> +
> + usb_host {
> + host_vbus_drv: host-vbus-drv {
> + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + usbhub_rst: usbhub-rst {
> + rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>;
> + };
> + };
> +
> + usb_otg {
> + otg_vbus_drv: otg-vbus-drv {
> + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + hym8563 {
> + rtc_int: rtc-int {
> + rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + act8846 {
> + pwr_hold: pwr-hold {
> + rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
> + };
> + };
ordering of pinctrl subnodes
> +};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
