Fix all warnings in Qualcomm boards coming from Coresight bindings. There are warnings below after running dtbs_check. The patches are to fix them for Qcom boards. funnel@3023000: 'in-ports' is a required property etm@7c40000: 'out-ports' is a required property etf@6047000: in-ports: '#address-cells', '#size-cells', 'port@1' do not match any of the regexes: 'pinctrl-[0-9]+' replicator@604a000: in-ports: '#address-cells', '#size-cells', 'port@1' do not match any of the regexes: 'pinctrl-[0-9]+' funnel@6c2d000: out-ports: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+' Warning (graph_child_address): /soc@0/tpda@6004000/out-ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary Warning (graph_child_address): /soc@0/funnel@6005000/in-ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary Warning (graph_child_address): /soc@0/etf@6b05000/in-ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary Warning (graph_child_address): /soc@0/funnel@7810000/in-ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary Changes since V1: 1. Add new dt binding for remote etm. 2. Add new dt node modem-etm in msm8996.dtsi Mao Jinlong (4): dt-bindings: arm: Add remote etm dt-binding arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property arm64: dts: qcom: Fix coresight warnings in in-ports and out-ports .../arm/qcom,coresight-remote-etm.yaml | 60 +++++++++++++++++++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 22 +++++++ arch/arm64/boot/dts/qcom/msm8998.dtsi | 32 ++++++---- arch/arm64/boot/dts/qcom/sdm845.dtsi | 5 +- arch/arm64/boot/dts/qcom/sm8150.dtsi | 5 +- arch/arm64/boot/dts/qcom/sm8250.dtsi | 24 ++------ 6 files changed, 108 insertions(+), 40 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml -- 2.41.0
