Hi Yamada-san, Thank you for the patch. On Thursday 15 January 2015 17:52:40 Masahiro Yamada wrote: > Signed-off-by: Masahiro Yamada <yamada.m@xxxxxxxxxxxxxxxx> Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > --- > > Documentation/devicetree/bindings/gpio/gpio.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt > b/Documentation/devicetree/bindings/gpio/gpio.txt index b9bd1d6..f7a158d > 100644 > --- a/Documentation/devicetree/bindings/gpio/gpio.txt > +++ b/Documentation/devicetree/bindings/gpio/gpio.txt > @@ -69,7 +69,8 @@ GPIO pin number, and GPIO flags as accepted by the > "qe_pio_e" gpio-controller. ---------------------------------- > > A gpio-specifier should contain a flag indicating the GPIO polarity; > active- -high or active-low. If it does, the follow best practices should > be followed: +high or active-low. If it does, the following best practices > should be +followed: > > The gpio-specifier's polarity flag should represent the physical level at > the GPIO controller that achieves (or represents, for inputs) a logically > asserted @@ -147,7 +148,7 @@ contains information structures as follows: > numeric-gpio-range ::= > <pinctrl-phandle> <gpio-base> <pinctrl-base> <count> > named-gpio-range ::= <pinctrl-phandle> <gpio-base> '<0 0>' > - gpio-phandle : phandle to pin controller node. > + pinctrl-phandle : phandle to pin controller node > gpio-base : Base GPIO ID in the GPIO controller > pinctrl-base : Base pinctrl pin ID in the pin controller > count : The number of GPIOs/pins in this range -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
