Hi Alex, Heiko,
On 12/4/23 20:12, Alex Bee wrote:
> Hi Johan,
> Am 04.12.23 um 18:40 schrieb Johan Jonker:
>> Add hdmi-connector node to comply with the inno_hdmi binding.
>>
>> Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
>> ---
>> arch/arm/boot/dts/rockchip/rk3036-kylin.dts | 17 +++++++++++++++++
>> 1 file changed, 17 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
>> index 67e1e04139e7..a213333be011 100644
>> --- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
>> +++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
>> @@ -13,6 +13,17 @@ memory@60000000 {
>> reg = <0x60000000 0x20000000>;
>> };
>>
>> + hdmi_con: hdmi-con {
>> + compatible = "hdmi-connector";
>> + type = "c";
> According to [0], kylin has an A-Type HDMI port - so this should be
> + type = "a";
> > [0] http://rockchip.wikidot.com/kylin
Not sure from the text or do I miss something...
I did look at that board picture before submitting.
Can be wrong, but to me it looks a smaller HDMI connector.
Does anyone have a Kylin picture from a different angle?
Or reference design?
Else apply and fix later? (Heiko ?)
Let me know.
Johan
>
> Regards,
> Alex
>> +
>> + port {
>> + hdmi_con_in: endpoint {
>> + remote-endpoint = <&hdmi_out_con>;
>> + };
>> + };
>> + };
>> +
>> leds: gpio-leds {
>> compatible = "gpio-leds";
>>
>> @@ -110,6 +121,12 @@ &hdmi {
>> status = "okay";
>> };
>>
>> +&hdmi_out {
>> + hdmi_out_con: endpoint {
>> + remote-endpoint = <&hdmi_con_in>;
>> + };
>> +};
>> +
>> &i2c1 {
>> clock-frequency = <400000>;
>>
>> --
>> 2.39.2
>>
>>
>> _______________________________________________
>> Linux-rockchip mailing list
>> Linux-rockchip@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
