From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx> Add UFS host controller and PHY nodes for sc7280 IDP board. Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 2ff549f4dc7a..a0059527d9e4 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -499,6 +499,25 @@ &uart5 { status = "okay"; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l7b_2p9>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; + vccq2-supply = <&vreg_l9b_1p2>; + vccq2-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l10c_0p8>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + &usb_1 { status = "okay"; }; -- 2.43.0