From: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
Quite a few nodes haven't been sorted correctly by reg, so let's do this
now so that future nodes can be added at the correct place.
Also at the same time, move the status property last.
No functional change intended.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
[luca: add more text to commit message]
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 660 +++++++++++++++----------------
1 file changed, 330 insertions(+), 330 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 97a377b5a0ec..8757bc0c8a0f 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -20,11 +20,6 @@ / {
chosen { };
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0>;
- };
-
clocks {
xo_board: xo_board {
compatible = "fixed-clock";
@@ -47,6 +42,11 @@ scm {
};
};
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
@@ -185,6 +185,64 @@ apcs: syscon@f9011000 {
reg = <0xf9011000 0x1000>;
};
+ timer@f9020000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0xf9020000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ frame@f9021000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9021000 0x1000>,
+ <0xf9022000 0x1000>;
+ };
+
+ frame@f9023000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9023000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9024000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9024000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9025000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9025000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9026000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9026000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9027000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9027000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9028000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9028000 0x1000>;
+ status = "disabled";
+ };
+ };
+
sdhc_1: mmc@f9824900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
@@ -201,22 +259,6 @@ sdhc_1: mmc@f9824900 {
status = "disabled";
};
- sdhc_2: mmc@f98a4900 {
- compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
- reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
- reg-names = "hc", "core";
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC2_AHB_CLK>,
- <&gcc GCC_SDCC2_APPS_CLK>,
- <&rpmcc RPM_SMD_XO_CLK_SRC>;
- clock-names = "iface", "core", "xo";
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_default_state>;
- status = "disabled";
- };
-
sdhc_3: mmc@f9864900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
@@ -233,6 +275,22 @@ sdhc_3: mmc@f9864900 {
status = "disabled";
};
+ sdhc_2: mmc@f98a4900 {
+ compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+ reg-names = "hc", "core";
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "core", "xo";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc2_default_state>;
+ status = "disabled";
+ };
+
blsp1_uart1: serial@f991d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991d000 0x1000>;
@@ -272,7 +330,6 @@ blsp1_uart4: serial@f9920000 {
};
blsp1_i2c1: i2c@f9923000 {
- status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9923000 0x1000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -282,10 +339,10 @@ blsp1_i2c1: i2c@f9923000 {
pinctrl-0 = <&blsp1_i2c1_pins>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
blsp1_i2c2: i2c@f9924000 {
- status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9924000 0x1000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -295,10 +352,10 @@ blsp1_i2c2: i2c@f9924000 {
pinctrl-0 = <&blsp1_i2c2_pins>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
blsp1_i2c3: i2c@f9925000 {
- status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9925000 0x1000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -308,10 +365,10 @@ blsp1_i2c3: i2c@f9925000 {
pinctrl-0 = <&blsp1_i2c3_pins>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
blsp1_i2c4: i2c@f9926000 {
- status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9926000 0x1000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -321,10 +378,10 @@ blsp1_i2c4: i2c@f9926000 {
pinctrl-0 = <&blsp1_i2c4_pins>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
blsp1_i2c5: i2c@f9927000 {
- status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9927000 0x1000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
@@ -334,6 +391,7 @@ blsp1_i2c5: i2c@f9927000 {
pinctrl-0 = <&blsp1_i2c5_pins>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
blsp1_i2c6: i2c@f9928000 {
@@ -351,33 +409,6 @@ blsp1_i2c6: i2c@f9928000 {
status = "disabled";
};
- cci: cci@fda0c000 {
- compatible = "qcom,msm8226-cci";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xfda0c000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
- clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
- <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
- <&mmcc CAMSS_CCI_CCI_CLK>;
- clock-names = "camss_top_ahb",
- "cci_ahb",
- "cci";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&cci_default>;
- pinctrl-1 = <&cci_sleep>;
-
- status = "disabled";
-
- cci_i2c0: i2c-bus@0 {
- reg = <0>;
- clock-frequency = <400000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
usb: usb@f9a55000 {
compatible = "qcom,ci-hdrc";
reg = <0xf9a55000 0x200>,
@@ -417,6 +448,18 @@ usb_hs_phy: phy {
};
};
+ rng@f9bff000 {
+ compatible = "qcom,prng";
+ reg = <0xf9bff000 0x200>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
+ sram@fc190000 {
+ compatible = "qcom,msm8226-rpm-stats";
+ reg = <0xfc190000 0x10000>;
+ };
+
gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8226";
reg = <0xfc400000 0x4000>;
@@ -430,146 +473,28 @@ gcc: clock-controller@fc400000 {
"sleep_clk";
};
- mmcc: clock-controller@fd8c0000 {
- compatible = "qcom,mmcc-msm8226";
- reg = <0xfd8c0000 0x6000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
+ rpm_msg_ram: sram@fc428000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0xfc428000 0x4000>;
- clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
- <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
- <&gcc GPLL0_VOTE>,
- <&gcc GPLL1_VOTE>,
- <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
- <0>,
- <0>;
- clock-names = "xo",
- "mmss_gpll0_vote",
- "gpll0_vote",
- "gpll1_vote",
- "gfx3d_clk_src",
- "dsi0pll",
- "dsi0pllbyte";
- };
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xfc428000 0x4000>;
- tlmm: pinctrl@fd510000 {
- compatible = "qcom,msm8226-pinctrl";
- reg = <0xfd510000 0x4000>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&tlmm 0 0 117>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-
- blsp1_i2c1_pins: blsp1-i2c1-state {
- pins = "gpio2", "gpio3";
- function = "blsp_i2c1";
- drive-strength = <2>;
- bias-disable;
+ apss_master_stats: sram@150 {
+ reg = <0x150 0x14>;
};
- blsp1_i2c2_pins: blsp1-i2c2-state {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c2";
- drive-strength = <2>;
- bias-disable;
+ mpss_master_stats: sram@b50 {
+ reg = <0xb50 0x14>;
};
- blsp1_i2c3_pins: blsp1-i2c3-state {
- pins = "gpio10", "gpio11";
- function = "blsp_i2c3";
- drive-strength = <2>;
- bias-disable;
+ lpss_master_stats: sram@1550 {
+ reg = <0x1550 0x14>;
};
- blsp1_i2c4_pins: blsp1-i2c4-state {
- pins = "gpio14", "gpio15";
- function = "blsp_i2c4";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp1_i2c5_pins: blsp1-i2c5-state {
- pins = "gpio18", "gpio19";
- function = "blsp_i2c5";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp1_i2c6_pins: blsp1-i2c6-state {
- pins = "gpio22", "gpio23";
- function = "blsp_i2c6";
- drive-strength = <2>;
- bias-disable;
- };
-
- cci_default: cci-default-state {
- pins = "gpio29", "gpio30";
- function = "cci_i2c0";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- cci_sleep: cci-sleep-state {
- pins = "gpio29", "gpio30";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdhc1_default_state: sdhc1-default-state {
- clk-pins {
- pins = "sdc1_clk";
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdhc2_default_state: sdhc2-default-state {
- clk-pins {
- pins = "sdc2_clk";
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdhc3_default_state: sdhc3-default-state {
- clk-pins {
- pins = "gpio44";
- function = "sdc3";
- drive-strength = <8>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "gpio43";
- function = "sdc3";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "gpio39", "gpio40", "gpio41", "gpio42";
- function = "sdc3";
- drive-strength = <8>;
- bias-pull-up;
- };
+ pronto_master_stats: sram@1f50 {
+ reg = <0x1f50 0x14>;
};
};
@@ -714,170 +639,153 @@ spmi_bus: spmi@fc4cf000 {
#interrupt-cells = <4>;
};
- rng@f9bff000 {
- compatible = "qcom,prng";
- reg = <0xf9bff000 0x200>;
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
- clock-names = "core";
- };
-
- timer@f9020000 {
- compatible = "arm,armv7-timer-mem";
- reg = <0xf9020000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- frame@f9021000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9021000 0x1000>,
- <0xf9022000 0x1000>;
- };
-
- frame@f9023000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9023000 0x1000>;
- status = "disabled";
- };
-
- frame@f9024000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9024000 0x1000>;
- status = "disabled";
- };
-
- frame@f9025000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9025000 0x1000>;
- status = "disabled";
- };
-
- frame@f9026000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9026000 0x1000>;
- status = "disabled";
- };
-
- frame@f9027000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9027000 0x1000>;
- status = "disabled";
- };
-
- frame@f9028000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9028000 0x1000>;
- status = "disabled";
- };
- };
-
- sram@fc190000 {
- compatible = "qcom,msm8226-rpm-stats";
- reg = <0xfc190000 0x10000>;
- };
-
- rpm_msg_ram: sram@fc428000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0xfc428000 0x4000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xfc428000 0x4000>;
-
- apss_master_stats: sram@150 {
- reg = <0x150 0x14>;
- };
-
- mpss_master_stats: sram@b50 {
- reg = <0xb50 0x14>;
- };
-
- lpss_master_stats: sram@1550 {
- reg = <0x1550 0x14>;
- };
-
- pronto_master_stats: sram@1f50 {
- reg = <0x1f50 0x14>;
- };
- };
-
tcsr_mutex: hwlock@fd484000 {
compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
reg = <0xfd484000 0x1000>;
#hwlock-cells = <1>;
};
- adsp: remoteproc@fe200000 {
- compatible = "qcom,msm8226-adsp-pil";
- reg = <0xfe200000 0x100>;
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,msm8226-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 117>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+ blsp1_i2c1_pins: blsp1-i2c1-state {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+ drive-strength = <2>;
+ bias-disable;
+ };
- power-domains = <&rpmpd MSM8226_VDDCX>;
- power-domain-names = "cx";
+ blsp1_i2c2_pins: blsp1-i2c2-state {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+ drive-strength = <2>;
+ bias-disable;
+ };
- clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
- clock-names = "xo";
+ blsp1_i2c3_pins: blsp1-i2c3-state {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-disable;
+ };
- memory-region = <&adsp_region>;
+ blsp1_i2c4_pins: blsp1-i2c4-state {
+ pins = "gpio14", "gpio15";
+ function = "blsp_i2c4";
+ drive-strength = <2>;
+ bias-disable;
+ };
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
+ blsp1_i2c5_pins: blsp1-i2c5-state {
+ pins = "gpio18", "gpio19";
+ function = "blsp_i2c5";
+ drive-strength = <2>;
+ bias-disable;
+ };
- status = "disabled";
+ blsp1_i2c6_pins: blsp1-i2c6-state {
+ pins = "gpio22", "gpio23";
+ function = "blsp_i2c6";
+ drive-strength = <2>;
+ bias-disable;
+ };
- smd-edge {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+ cci_default: cci-default-state {
+ pins = "gpio29", "gpio30";
+ function = "cci_i2c0";
- qcom,ipc = <&apcs 8 8>;
- qcom,smd-edge = <1>;
+ drive-strength = <2>;
+ bias-disable;
+ };
- label = "lpass";
+ cci_sleep: cci-sleep-state {
+ pins = "gpio29", "gpio30";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdhc1_default_state: sdhc1-default-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-data-pins {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdhc2_default_state: sdhc2-default-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-data-pins {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdhc3_default_state: sdhc3-default-state {
+ clk-pins {
+ pins = "gpio44";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "gpio43";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "gpio39", "gpio40", "gpio41", "gpio42";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
};
};
- sram@fdd00000 {
- compatible = "qcom,msm8226-ocmem";
- reg = <0xfdd00000 0x2000>,
- <0xfec00000 0x20000>;
- reg-names = "ctrl", "mem";
- ranges = <0 0xfec00000 0x20000>;
- clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>;
- clock-names = "core";
+ mmcc: clock-controller@fd8c0000 {
+ compatible = "qcom,mmcc-msm8226";
+ reg = <0xfd8c0000 0x6000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- gmu_sram: gmu-sram@0 {
- reg = <0x0 0x20000>;
- };
- };
-
- sram@fe805000 {
- compatible = "qcom,msm8226-imem", "syscon", "simple-mfd";
- reg = <0xfe805000 0x1000>;
-
- reboot-mode {
- compatible = "syscon-reboot-mode";
- offset = <0x65c>;
-
- mode-bootloader = <0x77665500>;
- mode-normal = <0x77665501>;
- mode-recovery = <0x77665502>;
- };
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
+ <&gcc GPLL0_VOTE>,
+ <&gcc GPLL1_VOTE>,
+ <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
+ <0>,
+ <0>;
+ clock-names = "xo",
+ "mmss_gpll0_vote",
+ "gpll0_vote",
+ "gpll1_vote",
+ "gfx3d_clk_src",
+ "dsi0pll",
+ "dsi0pllbyte";
};
mdss: display-subsystem@fd900000 {
@@ -1006,6 +914,98 @@ mdss_dsi0_phy: phy@fd922a00 {
"ref";
};
};
+
+ cci: cci@fda0c000 {
+ compatible = "qcom,msm8226-cci";
+ reg = <0xfda0c000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CCI_CLK>;
+ clock-names = "camss_top_ahb",
+ "cci_ahb",
+ "cci";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cci_default>;
+ pinctrl-1 = <&cci_sleep>;
+
+ status = "disabled";
+
+ cci_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ sram@fdd00000 {
+ compatible = "qcom,msm8226-ocmem";
+ reg = <0xfdd00000 0x2000>,
+ <0xfec00000 0x20000>;
+ reg-names = "ctrl", "mem";
+ ranges = <0 0xfec00000 0x20000>;
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>;
+ clock-names = "core";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gmu_sram: gmu-sram@0 {
+ reg = <0x0 0x20000>;
+ };
+ };
+
+ adsp: remoteproc@fe200000 {
+ compatible = "qcom,msm8226-adsp-pil";
+ reg = <0xfe200000 0x100>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ power-domains = <&rpmpd MSM8226_VDDCX>;
+ power-domain-names = "cx";
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_region>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ smd-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 8>;
+ qcom,smd-edge = <1>;
+
+ label = "lpass";
+ };
+ };
+
+ sram@fe805000 {
+ compatible = "qcom,msm8226-imem", "syscon", "simple-mfd";
+ reg = <0xfe805000 0x1000>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x65c>;
+
+ mode-bootloader = <0x77665500>;
+ mode-normal = <0x77665501>;
+ mode-recovery = <0x77665502>;
+ };
+ };
};
thermal-zones {
--
2.43.0
