Add system-power-controller property in the bindings and the corresponding implementation and use it where appropriate. Not all cases are hit yet, there has probably to be a separate series after going through with a brush. Changes in v3: - twl-core: - remove repetitive verbose error messages - placed constants at top part of function - minor cleanups Changes in v2: - add A-By - fix compiler warning Andreas Kemnade (6): dt-bindings: mfd: ti,twl: Document system-power-controller twl-core: add power off implementation for twl603x ARM: dts: omap-embt2ws: system-power-controller for bt200 ARM: dts: omap4-panda-common: Enable powering off the device mfd: twl4030-power: accept standard property for power controller ARM: dts: omap: gta04: standardize system-power-controller .../devicetree/bindings/mfd/ti,twl.yaml | 2 ++ arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi | 2 +- .../boot/dts/ti/omap/omap4-epson-embt2ws.dts | 1 + .../boot/dts/ti/omap/omap4-panda-common.dtsi | 1 + drivers/mfd/twl-core.c | 28 +++++++++++++++++++ drivers/mfd/twl4030-power.c | 3 ++ include/linux/mfd/twl.h | 1 + 7 files changed, 37 insertions(+), 1 deletion(-) -- 2.39.2