Rockchip RV1126 is using old style i2c controller, the i2c2 bus uses a non-sequential offset in the grf register for the mask/value bits for this bus. This patch fixes i2c2 bus on rv1126 SoCs. Signed-off-by: Tim Lunn <tim@xxxxxxxxxxxxxx> Acked-by: Heiko Stuebner <heiko@xxxxxxxxx> --- Changes in v3: - i2c: add code comment and clarify commit message further - i2c: Collect ack by Heiko Changes in v2: - i2c: clarify commit message drivers/i2c/busses/i2c-rk3x.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index a044ca0c35a1..06fec2344575 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -1288,8 +1288,12 @@ static int rk3x_i2c_probe(struct platform_device *pdev) return -EINVAL; } - /* 27+i: write mask, 11+i: value */ - value = BIT(27 + bus_nr) | BIT(11 + bus_nr); + /* rv1126 i2c2 uses non-sequential write mask 20, value 4 */ + if (i2c->soc_data == &rv1126_soc_data && bus_nr == 2) + value = BIT(20) | BIT(4); + else + /* 27+i: write mask, 11+i: value */ + value = BIT(27 + bus_nr) | BIT(11 + bus_nr); ret = regmap_write(grf, i2c->soc_data->grf_offset, value); if (ret != 0) { -- 2.40.1