On Thu, Nov 30, 2023 at 09:56:21AM -0600, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@xxxxxxxxxxx>
>
> Add support for the Powkiddy X55 panel as used on the Powkiddy X55
> handheld gaming console. This panel uses a Himax HX8394 display
> controller and requires a vendor provided init sequence. The display
> resolution is 720x1280 and is 67mm by 121mm as measured with calipers.
>
> Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
> ---
> drivers/gpu/drm/panel/panel-himax-hx8394.c | 137 +++++++++++++++++++++
> 1 file changed, 137 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c
b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index b68ea09f4725..4807ab1c10fe 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -38,6 +38,7 @@
> #define HX8394_CMD_SETMIPI 0xba
> #define HX8394_CMD_SETOTP 0xbb
> #define HX8394_CMD_SETREGBANK 0xbd
> +#define HX8394_CMD_UNKNOWN5 0xbf
> #define HX8394_CMD_UNKNOWN1 0xc0
> #define HX8394_CMD_SETDGCLUT 0xc1
> #define HX8394_CMD_SETID 0xc3
> @@ -52,6 +53,7 @@
> #define HX8394_CMD_SETGIP1 0xd5
> #define HX8394_CMD_SETGIP2 0xd6
> #define HX8394_CMD_SETGPO 0xd6
> +#define HX8394_CMD_UNKNOWN4 0xd8
> #define HX8394_CMD_SETSCALING 0xdd
> #define HX8394_CMD_SETIDLE 0xdf
> #define HX8394_CMD_SETGAMMA 0xe0
> @@ -203,6 +205,140 @@ static const struct hx8394_panel_desc
hsd060bhw4_desc = {
> .init_sequence = hsd060bhw4_init_sequence,
> };
>
> +static int powkiddy_x55_init_sequence(struct hx8394 *ctx)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +
> + /* 5.19.8 SETEXTC: Set extension command (B9h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETEXTC,
> + 0xff, 0x83, 0x94);
> +
> + /* 5.19.9 SETMIPI: Set MIPI control (BAh) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETMIPI,
> + 0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0);
> +
> + /* 5.19.2 SETPOWER: Set power (B1h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
> + 0x48, 0x12, 0x72, 0x09, 0x32, 0x54, 0x71, 0x71,
0x57, 0x47);
> +
> + /* 5.19.3 SETDISP: Set display related register (B2h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETDISP,
> + 0x00, 0x80, 0x64, 0x0c, 0x0d, 0x2f);
> +
> + /* 5.19.4 SETCYC: Set display waveform cycles (B4h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETCYC,
> + 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c,
0x86, 0x75,
> + 0x00, 0x3f, 0x73, 0x74, 0x73, 0x74, 0x73, 0x74,
0x01, 0x0c,
> + 0x86);
> +
> + /* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETVCOM,
> + 0x6e, 0x6e);
> +
> + /* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP0,
> + 0x00, 0x00, 0x07, 0x07, 0x40, 0x07, 0x0c, 0x00,
0x08, 0x10,
> + 0x08, 0x00, 0x08, 0x54, 0x15, 0x0a, 0x05, 0x0a,
0x02, 0x15,
> + 0x06, 0x05, 0x06, 0x47, 0x44, 0x0a, 0x0a, 0x4b,
0x10, 0x07,
> + 0x07, 0x0c, 0x40);
> +
> + /* 5.19.20 Set GIP Option1 (D5h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP1,
> + 0x1c, 0x1c, 0x1d, 0x1d, 0x00, 0x01, 0x02, 0x03,
0x04, 0x05,
> + 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x24, 0x25,
0x18, 0x18,
> + 0x26, 0x27, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
0x18, 0x18,
> + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
0x20, 0x21,
> + 0x18, 0x18, 0x18, 0x18);
> +
> + /* 5.19.21 Set GIP Option2 (D6h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP2,
> + 0x1c, 0x1c, 0x1d, 0x1d, 0x07, 0x06, 0x05, 0x04,
0x03, 0x02,
> + 0x01, 0x00, 0x0b, 0x0a, 0x09, 0x08, 0x21, 0x20,
0x18, 0x18,
> + 0x27, 0x26, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
0x18, 0x18,
> + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
0x25, 0x24,
> + 0x18, 0x18, 0x18, 0x18);
> +
> + /* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGAMMA,
> + 0x00, 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22,
0x47, 0x56,
> + 0x65, 0x66, 0x6e, 0x82, 0x88, 0x8b, 0x9a, 0x9d,
0x98, 0xa8,
> + 0xb9, 0x5d, 0x5c, 0x61, 0x66, 0x6a, 0x6f, 0x7f,
0x7f, 0x00,
> + 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47,
0x56, 0x65,
> + 0x65, 0x6e, 0x81, 0x87, 0x8b, 0x98, 0x9d, 0x99,
0xa8, 0xba,
> + 0x5d, 0x5d, 0x62, 0x67, 0x6b, 0x72, 0x7f, 0x7f);
> +
> + /* Unknown command, not listed in the HX8394-F datasheet */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN1,
> + 0x1f, 0x31);
> +
> + /* 5.19.17 SETPANEL (CCh) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPANEL,
> + 0x0b);
> +
> + /* Unknown command, not listed in the HX8394-F datasheet */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3,
> + 0x02);
> +
> + /* 5.19.11 Set register bank (BDh) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> + 0x02);
> +
> + /* Unknown command, not listed in the HX8394-F datasheet */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN4,
> + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff,
> + 0xff, 0xff);
> +
> + /* 5.19.11 Set register bank (BDh) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> + 0x00);
> +
> + /* 5.19.11 Set register bank (BDh) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> + 0x01);
> +
> + /* 5.19.2 SETPOWER: Set power (B1h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
> + 0x00);
> +
> + /* 5.19.11 Set register bank (BDh) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> + 0x00);
> +
> + /* Unknown command, not listed in the HX8394-F datasheet */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN5,
> + 0x40, 0x81, 0x50, 0x00, 0x1a, 0xfc, 0x01);
> +
> + /* Unknown command, not listed in the HX8394-F datasheet */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN2,
> + 0xed);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode powkiddy_x55_mode = {
> + .hdisplay = 720,
> + .hsync_start = 720 + 24,
> + .hsync_end = 720 + 24 + 4,
> + .htotal = 720 + 24 + 4 + 20,
> + .vdisplay = 1280,
> + .vsync_start = 1280 + 8,
> + .vsync_end = 1280 + 8 + 4,
> + .vtotal = 1280 + 8 + 4 + 8,
> + .clock = 59904,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> + .width_mm = 67,
> + .height_mm = 121,
> +};
> +
> +static const struct hx8394_panel_desc powkiddy_x55_desc = {
> + .mode = &powkiddy_x55_mode,
> + .lanes = 4,
> + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET,
It looks like a mode flag is set twice. The line above should be this below:
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
> + .format = MIPI_DSI_FMT_RGB888,
> + .init_sequence = powkiddy_x55_init_sequence,
> +};
> +
> static int hx8394_enable(struct drm_panel *panel)
> {
> struct hx8394 *ctx = panel_to_hx8394(panel);
> @@ -419,6 +555,7 @@ static void hx8394_remove(struct mipi_dsi_device
*dsi)
>
> static const struct of_device_id hx8394_of_match[] = {
> { .compatible = "hannstar,hsd060bhw4", .data = &hsd060bhw4_desc },
> + { .compatible = "powkiddy,x55-panel", .data = &powkiddy_x55_desc },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, hx8394_of_match);
> --
> 2.34.1
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
