On 29/11/2023 18:04, Petre Rodan wrote: > Adds binding for digital Honeywell TruStability HSC and SSC series > pressure and temperature sensors. > Communication is one way. The sensor only requires 4 bytes worth of > clock pulses on both i2c and spi in order to push the data out. > The i2c address is hardcoded and depends on the part number. > There is no additional GPIO control. > > Datasheet: > https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf [HSC] > Datasheet: > https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf [SSC] > Signed-off-by: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx> This is a friendly reminder during the review process. It looks like you received a tag and forgot to add it. If you do not know the process, here is a short explanation: Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions, under or above your Signed-off-by tag. Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply. https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577 If a tag was not added on purpose, please state why and what changed. Best regards, Krzysztof
