[PATCH v3 4/4] pwm: meson: add generic compatible for meson8 to sm1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Introduce a new compatible support in the Amlogic PWM driver.

The PWM HW is actually the same for all SoCs supported so far.
A specific compatible is needed only because the clock sources
of the PWMs are hard-coded in the driver.

It is better to have the clock source described in DT but this
changes the bindings so a new compatible must be introduced.

When all supported platform have migrated to the new compatible,
support for the legacy ones may be removed from the driver.

Adding a callback to setup the clock will also make it easier
to add support for the new PWM HW found in a1, s4, c3 and t7 SoC
families.

Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
 drivers/pwm/pwm-meson.c | 224 ++++++++++++++++++++++++----------------
 1 file changed, 133 insertions(+), 91 deletions(-)

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 5cbd65cae28a..d5d745a651d3 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -95,6 +95,7 @@ struct meson_pwm_channel {
 
 struct meson_pwm_data {
 	const char * const *parent_names;
+	int (*channels_init)(struct device *dev);
 };
 
 struct meson_pwm {
@@ -333,95 +334,6 @@ static const struct pwm_ops meson_pwm_ops = {
 	.get_state = meson_pwm_get_state,
 };
 
-static const char * const pwm_meson8b_parent_names[] = {
-	"xtal", NULL, "fclk_div4", "fclk_div3"
-};
-
-static const struct meson_pwm_data pwm_meson8b_data = {
-	.parent_names = pwm_meson8b_parent_names,
-};
-
-/*
- * Only the 2 first inputs of the GXBB AO PWMs are valid
- * The last 2 are grounded
- */
-static const char * const pwm_gxbb_ao_parent_names[] = {
-	"xtal", "clk81", NULL, NULL,
-};
-
-static const struct meson_pwm_data pwm_gxbb_ao_data = {
-	.parent_names = pwm_gxbb_ao_parent_names,
-};
-
-static const char * const pwm_axg_ee_parent_names[] = {
-	"xtal", "fclk_div5", "fclk_div4", "fclk_div3"
-};
-
-static const struct meson_pwm_data pwm_axg_ee_data = {
-	.parent_names = pwm_axg_ee_parent_names,
-};
-
-static const char * const pwm_axg_ao_parent_names[] = {
-	"xtal", "axg_ao_clk81", "fclk_div4", "fclk_div5"
-};
-
-static const struct meson_pwm_data pwm_axg_ao_data = {
-	.parent_names = pwm_axg_ao_parent_names,
-};
-
-static const char * const pwm_g12a_ao_ab_parent_names[] = {
-	"xtal", "g12a_ao_clk81", "fclk_div4", "fclk_div5"
-};
-
-static const struct meson_pwm_data pwm_g12a_ao_ab_data = {
-	.parent_names = pwm_g12a_ao_ab_parent_names,
-};
-
-static const char * const pwm_g12a_ao_cd_parent_names[] = {
-	"xtal", "g12a_ao_clk81", NULL, NULL,
-};
-
-static const struct meson_pwm_data pwm_g12a_ao_cd_data = {
-	.parent_names = pwm_g12a_ao_cd_parent_names,
-};
-
-static const struct of_device_id meson_pwm_matches[] = {
-	{
-		.compatible = "amlogic,meson8b-pwm",
-		.data = &pwm_meson8b_data
-	},
-	{
-		.compatible = "amlogic,meson-gxbb-pwm",
-		.data = &pwm_meson8b_data
-	},
-	{
-		.compatible = "amlogic,meson-gxbb-ao-pwm",
-		.data = &pwm_gxbb_ao_data
-	},
-	{
-		.compatible = "amlogic,meson-axg-ee-pwm",
-		.data = &pwm_axg_ee_data
-	},
-	{
-		.compatible = "amlogic,meson-axg-ao-pwm",
-		.data = &pwm_axg_ao_data
-	},
-	{
-		.compatible = "amlogic,meson-g12a-ee-pwm",
-		.data = &pwm_meson8b_data
-	},
-	{
-		.compatible = "amlogic,meson-g12a-ao-pwm-ab",
-		.data = &pwm_g12a_ao_ab_data
-	},
-	{
-		.compatible = "amlogic,meson-g12a-ao-pwm-cd",
-		.data = &pwm_g12a_ao_cd_data
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, meson_pwm_matches);
-
 static int meson_pwm_init_clocks_legacy(struct device *dev,
 					struct clk_parent_data *mux_parent_data)
 {
@@ -528,12 +440,15 @@ static int meson_pwm_init_clocks_legacy(struct device *dev,
 	return 0;
 }
 
-static int meson_pwm_init_channels(struct device *dev)
+static int meson_pwm_init_channels_legacy(struct device *dev)
 {
 	struct clk_parent_data mux_parent_data[MESON_NUM_MUX_PARENTS] = {};
 	struct meson_pwm *meson = dev_get_drvdata(dev);
 	int i;
 
+	dev_info(dev, "using obsolete compatible, please consider updating dt\n");
+
+
 	for (i = 0; i < MESON_NUM_MUX_PARENTS; i++) {
 		mux_parent_data[i].index = -1;
 		mux_parent_data[i].name = meson->data->parent_names[i];
@@ -542,6 +457,133 @@ static int meson_pwm_init_channels(struct device *dev)
 	return meson_pwm_init_clocks_legacy(dev, mux_parent_data);
 }
 
+static int meson_pwm_init_channels_meson8b_v2(struct device *dev)
+{
+	struct clk_parent_data mux_parent_data[MESON_NUM_MUX_PARENTS] = {};
+	int i;
+
+	/*
+	 * NOTE: Instead of relying on the hard coded names in the driver
+	 * as the legacy version, this relies on DT to provide the list of
+	 * clocks.
+	 * For once, using input numbers actually makes more sense than names.
+	 * Also DT requires clock-names to be explicitly ordered, so there is
+	 * no point bothering with clock names in this case.
+	 */
+	for (i = 0; i < MESON_NUM_MUX_PARENTS; i++)
+		mux_parent_data[i].index = i;
+
+	return meson_pwm_init_clocks_legacy(dev, mux_parent_data);
+}
+
+static const char * const pwm_meson8b_parent_names[] = {
+	"xtal", NULL, "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_meson8b_data = {
+	.parent_names = pwm_meson8b_parent_names,
+	.channels_init = meson_pwm_init_channels_legacy,
+};
+
+/*
+ * Only the 2 first inputs of the GXBB AO PWMs are valid
+ * The last 2 are grounded
+ */
+static const char * const pwm_gxbb_ao_parent_names[] = {
+	"xtal", "clk81", NULL, NULL,
+};
+
+static const struct meson_pwm_data pwm_gxbb_ao_data = {
+	.parent_names = pwm_gxbb_ao_parent_names,
+	.channels_init = meson_pwm_init_channels_legacy,
+};
+
+static const char * const pwm_axg_ee_parent_names[] = {
+	"xtal", "fclk_div5", "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_axg_ee_data = {
+	.parent_names = pwm_axg_ee_parent_names,
+	.channels_init = meson_pwm_init_channels_legacy,
+};
+
+static const char * const pwm_axg_ao_parent_names[] = {
+	"xtal", "axg_ao_clk81", "fclk_div4", "fclk_div5"
+};
+
+static const struct meson_pwm_data pwm_axg_ao_data = {
+	.parent_names = pwm_axg_ao_parent_names,
+	.channels_init = meson_pwm_init_channels_legacy,
+};
+
+static const char * const pwm_g12a_ao_ab_parent_names[] = {
+	"xtal", "g12a_ao_clk81", "fclk_div4", "fclk_div5"
+};
+
+static const struct meson_pwm_data pwm_g12a_ao_ab_data = {
+	.parent_names = pwm_g12a_ao_ab_parent_names,
+	.channels_init = meson_pwm_init_channels_legacy,
+};
+
+static const char * const pwm_g12a_ao_cd_parent_names[] = {
+	"xtal", "g12a_ao_clk81", NULL, NULL,
+};
+
+static const struct meson_pwm_data pwm_g12a_ao_cd_data = {
+	.parent_names = pwm_g12a_ao_cd_parent_names,
+	.channels_init = meson_pwm_init_channels_legacy,
+};
+
+static const struct meson_pwm_data pwm_meson8_v2_data = {
+	.channels_init = meson_pwm_init_channels_meson8b_v2,
+};
+
+static const struct of_device_id meson_pwm_matches[] = {
+	{
+		.compatible = "amlogic,meson8-pwm-v2",
+		.data = &pwm_meson8_v2_data
+	},
+	/*
+	 * The following compatibles are obsolete.
+	 * Support for these may be removed once the related
+	 * platforms have been updated
+	 */
+	{
+		.compatible = "amlogic,meson8b-pwm",
+		.data = &pwm_meson8b_data
+	},
+	{
+		.compatible = "amlogic,meson-gxbb-pwm",
+		.data = &pwm_meson8b_data
+	},
+	{
+		.compatible = "amlogic,meson-gxbb-ao-pwm",
+		.data = &pwm_gxbb_ao_data
+	},
+	{
+		.compatible = "amlogic,meson-axg-ee-pwm",
+		.data = &pwm_axg_ee_data
+	},
+	{
+		.compatible = "amlogic,meson-axg-ao-pwm",
+		.data = &pwm_axg_ao_data
+	},
+	{
+		.compatible = "amlogic,meson-g12a-ee-pwm",
+		.data = &pwm_meson8b_data
+	},
+	{
+		.compatible = "amlogic,meson-g12a-ao-pwm-ab",
+		.data = &pwm_g12a_ao_ab_data
+	},
+	{
+		.compatible = "amlogic,meson-g12a-ao-pwm-cd",
+		.data = &pwm_g12a_ao_cd_data
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, meson_pwm_matches);
+
 static int meson_pwm_probe(struct platform_device *pdev)
 {
 	struct meson_pwm *meson;
@@ -573,7 +615,7 @@ static int meson_pwm_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	err = meson_pwm_init_channels(&pdev->dev);
+	err = meson->data->channels_init(&pdev->dev);
 	if (err < 0)
 		return err;
 
-- 
2.42.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux