Hi, On 11/01/2015 at 13:56:15 +0100, Boris Brezillon wrote : > Hi Lee, > > On Wed, 3 Dec 2014 21:44:04 +0100 > Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> wrote: > > > The EBI (External Bus Interface) is used to access external peripherals > > (NOR, SRAM, NAND, and other specific devices like ethernet controllers). > > Each device is assigned a CS line and an address range and can have its > > own configuration (timings, access mode, bus width, ...). > > This driver provides a generic DT binding to configure a device according > > to its requirements. > > For specific device controllers (like the NAND one) the SMC timings > > should be configured by the controller driver through the matrix and > > smc syscon regmaps. > > > > The first 4 patches introduce 2 syscon devices needed to configure the > > EBI bus, patch 5 and 6 adds support for the EBI bus, and the remaining > > patches declares the EBI related nodes in sama5d3 dts[i] files. > > Can you take the first 4 patches of this series (adding 2 syscon > devices and their associated bindings doc) for 3.20 ? > Alexandre has worked on multi platform support for Atmel SoCs and his > work depends on these two syscon devices. > > Let me know if you want me to send to send a new series containing only > those 4 commits. > Actually, because of other series depending on it and because you already acked them, Nicolas wants to take those 4 patches through the AT91 tree, unless you have any reason to take them through your tree. Sorry for the noise. -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
