Three different OV5640 modules are supported using the 15-pin FFC connector on SK-AM62: - Digilent PCam 5C - ALINX AN5641 - TEVI-OV5640-*-RPI The Digilent and ALINX modules supply a 12Mhz XCLK to the sensor, while the TEVI module supplies a 24Mhz XCLK, thus requiring a separate overlay. These overlays can be used on other boards of the SK-AM62* family that have a 15/22-pin FFC connector, so we name the overlays with the prefix k3-am62x-. Tested-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxx> Signed-off-by: Jai Luthra <j-luthra@xxxxxx> --- arch/arm64/boot/dts/ti/Makefile | 19 ++++- .../arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso | 82 ++++++++++++++++++++++ .../boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso | 82 ++++++++++++++++++++++ 3 files changed, 182 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index c6c7825b4cb2..f957b5f741ff 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -32,6 +32,10 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb # Boards with AM62Px SoC dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb +# Common overlays for SK-AM62* family of boards +dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-ov5640.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-tevi-ov5640.dtbo + # Boards with AM64x SoC dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb @@ -87,13 +91,26 @@ k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \ k3-am625-beagleplay-csi2-ov5640.dtbo k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \ k3-am625-beagleplay-csi2-tevi-ov5640.dtbo +k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \ + k3-am62x-sk-csi2-ov5640.dtbo +k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \ + k3-am62x-sk-csi2-tevi-ov5640.dtbo +k3-am62a7-sk-csi2-ov5640-dtbs := k3-am62a7-sk.dtb \ + k3-am62x-sk-csi2-ov5640.dtbo +k3-am62a7-sk-csi2-tevi-ov5640-dtbs := k3-am62a7-sk.dtb \ + k3-am62x-sk-csi2-tevi-ov5640.dtbo dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ - k3-am625-beagleplay-csi2-tevi-ov5640.dtb + k3-am625-beagleplay-csi2-tevi-ov5640.dtb \ + k3-am625-sk-csi2-ov5640.dtb \ + k3-am625-sk-csi2-tevi-ov5640.dtb \ + k3-am62a7-sk-csi2-ov5640.dtb \ + k3-am62a7-sk-csi2-tevi-ov5640.dtb # Enable support for device-tree overlays DTC_FLAGS_k3-am625-beagleplay += -@ DTC_FLAGS_k3-am625-sk += -@ DTC_FLAGS_k3-am62-lp-sk += -@ +DTC_FLAGS_k3-am62a7-sk += -@ DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@ DTC_FLAGS_k3-j721e-common-proc-board += -@ DTC_FLAGS_k3-j721s2-common-proc-board += -@ diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso new file mode 100644 index 000000000000..1f3aebbc8df8 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + clk_ov5640_fixed: ov5640-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; +}; + +&main_i2c2 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + /* CAM port */ + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + }; +}; + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&ti_csi2rx0 { + status = "okay"; +}; + +&dphy0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso new file mode 100644 index 000000000000..6a367f13be63 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Technexion TEVI-OV5640-*-RPI - OV5640 camera module + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + clk_ov5640_fixed: ov5640-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; +}; + +&main_i2c2 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + /* CAM port */ + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + }; +}; + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&ti_csi2rx0 { + status = "okay"; +}; + +&dphy0 { + status = "okay"; +}; -- 2.42.1
