This series aims to add initial support for the Gossen Metrawatt Profitest MF board (internally known as e143_01), as well as the Variscite VAR-SOM-MX7 System on Module that it is based on. The resulting device tree has been dt-schema-validated, and the necessary fixes have been submitted in the following patch series: http://lore.kernel.org/r/20231127-b4-dt-bindings-serial-v1-1-422a198fd91a@xxxxxxxxxxxxxx http://lore.kernel.org/r/20231127-b4-dt-bindings-mxsfb-v1-1-922e4e71c838@xxxxxxxxxxxxxx http://lore.kernel.org/r/20231127-b4-dt-bindings-timer-v1-1-e06bd6b2370b@xxxxxxxxxxxxxx http://lore.kernel.org/r/20231127-b4-imx7-dt-v1-1-6ecbd0471cc4@xxxxxxxxxxxxxx It builds on top of this series adding MIPI-DSI support to i.MX7: http://lore.kernel.org/r/20231127-b4-imx7-mipi-dsi-v1-0-7d22eee70c67@xxxxxxxxxxxxxx Signed-off-by: Roland Hieber <rhi@xxxxxxxxxxxxxx> --- Marco Felsch (2): ARM: dts: add Variscite VAR-SOM-MX7 System on Module ARM: dts: add support for Gossen Metrawatt Profitest Philipp Zabel (3): dt-bindings: at24: add ROHM BR24G04 dt-bindings: vendor-prefixes: add Gossen Metrawatt ARM: dts: imx7d-pinfunc: add mux for OSC32K_32K_OUT via GPIO1_IO03 Documentation/devicetree/bindings/arm/fsl.yaml | 7 + Documentation/devicetree/bindings/eeprom/at24.yaml | 1 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/nxp/imx/Makefile | 1 + arch/arm/boot/dts/nxp/imx/imx7d-gome-e143_01.dts | 559 +++++++++++++++++++ arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h | 1 + arch/arm/boot/dts/nxp/imx/imx7d-var-som-mx7.dtsi | 607 +++++++++++++++++++++ 7 files changed, 1178 insertions(+) --- base-commit: 2cc14f52aeb78ce3f29677c2de1f06c0e91471ab change-id: 20231127-b4-imx7-var-som-gome-1778614e68dc Best regards, -- Roland Hieber, Pengutronix e.K. | rhi@xxxxxxxxxxxxxx | Steuerwalder Str. 21 | https://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
